(3)
To disconnect a wire:
-use extraction tool P/N 000407-0004 and release contact from rear of the insulator.
(4) Assemble backshell ferrule and sealing grommet on connector. ________________
6. Connection Table R (Ref. Fig. 007)
20-44-19 Page 11
Miscellaneous Circular Connectors - Contacts and tools 000100-0113C R Figure 006
20-44-19 Page 12
Miscellaneous Circular Connectors - Connection Table R Figure 007
20-44-19 Page 13
__________________________________________________
RECTANGULAR CONNECTORS - DESCRIPTION AND OPERATION
_______1. General This chapter concerns description,installation and identification of connectors used on aircraft.
______________________________________2. Structure of the chapters that follow:
A. Connectors Type MIL-C-81659(ARINC 404) (Ref. 20-44-21)
B. Connectors Type ARINC 600 (Ref. 20-44-22)
C. Connectors Type MIL-C-24308 (Ref. 20-44-23)
R D. Connectors Type PREN 3545-01 (Ref. 20-44-24)
R E. Miscellaneous Rectangular Connectors (Ref. 20-44-29)
20-44-20 Page 1
R _____________________________________________________________________
CONNECTORS TYPE MIL-C-81659 AND ARINC 404 - DESCRIPTION AND OPERATION
_______1. General
R Connectors type MIL-C-81659 and ARINC 404 installed on aircraft have
R following code :
R - DPA and DPAMA (or RE) Connectors:
R E0083 and NSA938310
R
R - DPD and DPDMA Connectors:
Single shell:
R E0087 and NSA938341
Two gang shell:
R E0097 and NSA938346
R
R - DPX (or RME, DSX) Connectors:
Single shell:
R NSA938323
R NSA938325
R E0145
Two gang shell:
R E0122, NSA938331 and NSA938332
R E0086 and E0147
Three gang shell:
R E0726
R Four gang shell:
R ABS0773
_______________________________2. DPA and DPAMA Series Connectors
A. E0083 and NSA938310 Connectors (Single shell - ARINC 404)
(1) P/N Identification
20-44-21 Page 120-44-21 Page 220-44-21 Page 3
E0083 V 8 - 33 S C
NSA938310 | 6 | | |
| | | | | |-- Variant code | C = without contact
| | | | | | No code = with contact
| | | | |
R | | | | | ------ Type of contact | P = Pin
R | | | | | S = Socket
| | | |
R | | | |------------ Type of housing | 33 = Male shell
R | | | | 34 = Female shell
| | |
R | | |------------------ Contact arrangement code
| |
R | |------------------------ Contact type code (Ref. table)
R
|
R |-------------------------------- Standard P/N
-------------------------------------------------------------
| Code | Contact Type | Contact Arrangement |
| | | E0083 | NSA938310 |
|-----------------------------------------------------------|
R | Dash | with fix | | |
R | (-) | soldered | 3 | 6 |
| | contacts | | |
|--------|-------------------|------------- |--------------|
| | with detachable | | |
| V | crimped | 6A and 8 | E24C2 and 32 |
| | contacts | | |
| | | | |
-------------------------------------------------------------
(2) P/N characteristics
(a) Temperature
Minimum operating temperature is : -55 deg.C (-67.00 deg.F).
Maximum operating temperature is : 138 deg.C (280.40 deg.F).
(b) Contact arrangement
(Ref. Fig. 001)
(c) Contact allocation
For normal contact and coaxial contact allocation,
refer to Para : Contact Allocation.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 ESPM Electrical Standard Practices Manual 3(36)
