(2) Disconnect the electrical connector 4004VC-A from the junction box at station 176.
(3) Open the flip-lock clamp (10) that attaches the harness (5) to the
bracket. R R BEFORE SPIB NO. CFM02255MW1 R
(4) Open the line blocks (15), (20), and (25) that attach the harness (5) to the brackets at station 158.
(5) If necessary, remove the rubber supports from the line blocks.
(6) Remove the harness (5) from the rubber supports and the flip-lock clamp (10).
CONFIG-1
(7) Open the line block (30) that attaches the harness (5) to the bracket at station 167 (B2).
CONFIG-2
(Ref. Fig. 406/TASK 71-51-43-991-311)
(Detail B)
F 『 EEFF : ALL E Page 46471-51-43
E E Feb 01/04 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
(8) Remove the bolt (55) that attaches the clamp (60) to the bracket at station 167. Remove the clamp (60) from the harness (5).
END CONFIG-2
(9) Open the line blocks (25), (40), (45) and (50) that attach the
harness (5) to the brackets.
(Ref. Fig. 407/TASK 71-51-43-991-312)
(10) If necessary, remove the rubber supports from the line blocks.
(11) Remove the harness (15) from the rubber supports.
(12) Open the flip-lock clamp (35) near the ignition exciter A and remove the harness (5).
AFTER SPIB NO. CFM02255MW1
(Ref. Fig. 406/TASK 71-51-43-991-311)
(13) Open the line block (25) that attaches the harness (5) to the bracket at station 158.
(14) If necessary, remove the rubber supports fromm the line block.
(15) Remove the bolts and clamps (17) that attach the harness (5) to the bracket at station 158.
(16) Remove the bolts and clamps (22) that attach the harness (5) to the bracket at station 158.
(17) Remove the harness (5) from the rubber supports, the flip-lock clamp
(10) and the clamps (17) and (22).
CONFIG-1
(18) Open the line block (30) that attaches the harness (5) to the bracket at station 167 (B2).
CONFIG-2
(Ref. Fig. 406/TASK 71-51-43-991-311)
(Detail B)
(19) Remove the bolt (55) that attaches the clamp (60) to the bracket at station 167. Remove the clamp (60) from the harness (5).
END CONFIG-2
F 『 EEFF : ALL E Page 46571-51-43
E E May 01/04 ERE
ECES E F 『 E C F M E E E E 56-5B E F 『 E C F M E E E E 56-5B E F 『 E C F M E E E E 56-5B E F 『 E C F M E E E E 56-5B E E 56-5B E E E
R R ECU Channel A Harness - Upper Right Fan Zone Figure 406/TASK 71-51-43-991-311- 12 (SHEET 1)
F EEFF : E E ECES ALL 『E 71-51-43EEE Page 466 Feb 01/04
R R ECU Channel A Harness - Upper Right Fan Zone Figure 406/TASK 71-51-43-991-311- 22 (SHEET 2)
F EEFF : E E ECES ALL 『E 71-51-43EEE Page 467 Feb 01/04
R R ECU Channel A Harness - Lower Right Fan Zone Figure 407/TASK 71-51-43-991-312- 12 (SHEET 1)
F EEFF : E E ECES ALL 『E 71-51-43EEE Page 468 Feb 01/04
R R ECU Channel A Harness - Lower Right Fan Zone Figure 407/TASK 71-51-43-991-312- 22 (SHEET 2)
F EEFF : E E ECES ALL 『E 71-51-43EEE Page 469 Feb 01/04
F 『
E C F M E
E E
(20) Open the line blocks (25), (40), (45) and (50) that attach the
harness (5) to the brackets.
(Ref. Fig. 407/TASK 71-51-43-991-312)
(21) If necessary, remove the rubber supports from the line blocks.
(22) Remove the harness (5) from the rubber supports.
(23) Remove the bolt, clamp and anti-rotation lug (37) near the ignition exciter A and remove the harness (5).
END SPIB NO. CFM02255MW1
(24) Disconnect the electrical connector 4000JH1-A from the ignition
exciter A.
(25) Disconnect the electrical connectors 4000KS-J1 and 4000KS-J3 from the ECU.
(26) Remove the electrical harness (5) from the engine.
(27) Put protective covers on the electrical connectors.
F 『 EEFF : ALL E Page 47071-51-43
E E May 01/04 ERE
ECES E
F 『
E C F M E
E E
E 56-5B E
E E
TASK 71-51-43-400-046
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM 动力装置 POWER PLANT 2(32)