F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS
-------------------------------------------------------------------------------(Ref. TASK 71-51-43-000-045) and (Ref. TASK 71-51-43-400-045) or (Ref. TASK 71-51-43-000-046) and (Ref. TASK 71-51-43-400-046) or (Ref. TASK 71-51-43-000-047) and (Ref. TASK 71-51-43-400-047) or (Ref. TASK 71-51-43-000-048) and (Ref. TASK 71-51-43-400-048) or (Ref. TASK 71-51-43-000-049) and (Ref. TASK 71-51-43-400-049) or (Ref. TASK 71-51-43-000-004) and (Ref. TASK 71-51-43-400-004) or (Ref. TASK 71-51-43-000-001) and (Ref. TASK 71-51-43-400-001) or (Ref. TASK 71-51-43-000-002) and (Ref. TASK 71-51-43-400-002) or (Ref. TASK 71-51-43-000-003) and (Ref. TASK 71-51-43-400-003) or (Ref. TASK 71-52-43-000-042) and (Ref. TASK 71-52-43-400-042) or (Ref. TASK 71-52-43-000-043) and (Ref. TASK 71-52-43-400-043) If the wire conductor is damaged and a repair is necessary, contact an engine manufacturer field representative or
F 『 EEFF : ALL E Page 60871-50-00
E E Feb 01/03 ERE
ECES E -------------------------------------------------------------------------------
F 『
E C F M E
E E
E 56-5B E
E E
INSPECT/CHECK MAXIMUM REMARKS
SERVICEABLE LIMITS
-------------------------------------------------------------------------------R electrical engineering for R the necessary repair.
5. Close-up
________
Subtask 71-50-00-410-050
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Close the thrust reverser doors (Ref. TASK 78-36-00-410-040): FOR 1000EM1 451AL, 452AR FOR 1000EM2 461AL, 462AR
(3) Remove the access platform(s).
Subtask 71-50-00-440-050
B. Make the thrust reverser serviceable (Ref. TASK 78-30-00-081-041).
Subtask 71-50-00-410-051
C. Close Access
(1) Close the fan cowl doors (Ref. TASK 71-13-00-410-040): FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR
(2) Remove the warning notice(s).
F 『 EEFF : ALL E Page 60971-50-00
E E May 01/98 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
TASK 71-50-00-280-001
Continuity Check of the Power Plant Wire Harness
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific digital multimeter model 160 B
No specific ohmmeter model 260
No specific warning notice
No specific access platform 1 m (3 ft. 3 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors
71-13-00-410-040 Closing of the Fan Cowl Doors
78-30-00-081-041 Make the Thrust Reverser Serviceable after
Maintenance
78-30-00-481-041 Make the Thrust Reverser Unserviceable for
Maintenance
78-36-00-010-040 Opening of the Thrust Reverser Doors
78-36-00-410-040 Closing of the Thrust Reverser Doors
AWM 20-00-00
3. Job Set-up
__________
Subtask 71-50-00-941-051
A. Safety Precautions
(1) On the center pedestal, on the ENG panel 115VU:
(a) Put a warning notice to tell persons not to start the engine.
F 『 EEFF : ALL E Page 61071-50-00
E E May 01/98 ERE ECES E
F 『
E C F M E
E E
E 56-5B E
E E
(2) Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.
(3) On the overhead maintenance panel 50VU:
(a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 动力装置 POWER PLANT 2(13)
