F EEFF : ALL E E ECES
Opening of the Fan Cowl Doors
Closing of the Fan Cowl Doors
Removal of the Left Side Harness (4216KS)
Removal of the Fire Detector (Channel A) Harness
(4202KS)
Removal of the Fire Detector (Channel B) Harness
(4203KS)
Removal of the ECU (Channel B) to Thrust Reverser
Junction Box Harnesses (4214KS)
Removal of the Generator Power Harness (4210KS)
Removal of the Thrust Reverser (Channel A and B)
Harness (4200KS)
Removal of the IDG Control and Anti-Ice Harness
(4215KS)
Removal of the ECU (Channel A) Harness (4211KS)
Removal of the ECU (Channel B) Harness (4212KS)
Removal of the Vibration Sensor Harness (4201KS)
Removal of the ECU (Channel A) to Thrust Reverser
Junction Box Harnesses (4213KS)
Installation of the Left Side Harness (4216KS)
『
E 71-50-00Page 601
E May 01/98EE
F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
71-51-43-400-002 Installation of the Fire Detector (Channel A) Harness (4202KS) 71-51-43-400-003 Installation of the Fire Detector (Channel B) Harness (4203KS) 71-51-43-400-004 Installation of the ECU (Channel B) to thrust
Reverser Junction Box Harnesses (4214KS) 71-51-43-400-043 Installation of the Generator Power Harness (4210KS) 71-51-43-400-044 Installation of the Thrust Reverser (Channel A and B)
Harness (4200KS) 71-51-43-400-045 Installation of the IDG Control and Anti-Ice Harness
(4215KS) 71-51-43-400-046 Installation of the ECU (Channel A) Harness (4211KS) 71-51-43-400-047 Installation of the ECU (Channel B) Harness (4212KS) 71-51-43-400-048 Installation of the Vibration Sensor Harness (4201KS) 71-51-43-400-049 Installation of the ECU (Channel A) to Thrust
Reverser Junction Box Harnesses (4213KS) 71-52-43-000-042 Removal of the Core Fire Detector Channel A Wire Harness (4204KS) 71-52-43-000-043 Removal of the Core Fire Detector Channel B Wire Harness (4205KS) 71-52-43-400-042 Installation of the Core Fire Detector Channel A Wire Harness (4204KS) 71-52-43-400-043 Installation of the Core Fire Detector Channel B Wire Harness (4205KS) 78-30-00-081-041 Make the Thrust Reverser Serviceable after Maintenance 78-30-00-481-041 Make the Thrust Reverser Unserviceable for
Maintenance
78-36-00-010-040 Opening of the Thrust Reverser Doors
78-36-00-410-040 Closing of the Thrust Reverser Doors
R AMM 70-71-45
R AMM 70-71-53
R CMM 70-50-03 CMM 71-50-03 IPC 71-51-00
F 『 EEFF : ALL E Page 60271-50-00
E E Feb 01/03 E E ECES E 3. Job Set-up
F 『
E C F M E
E E
E 56-5B E
E E
__________ Subtask 71-50-00-941-050
A. Safety Precautions
(1) On the center pedestal, on the ENG panel 115VU:
(a) Put a warning notice to tell persons not to start the engine.
(2) Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.
(3) On the overhead maintenance panel 50VU:
(a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.
(b) Put a warning notice to tell persons not to energize the FADEC 1(2).
Subtask 71-50-00-010-050
B. Get Access
(1) Open the fan cowl doors (Ref. TASK 71-13-00-010-040):
FOR 1000EM1
437AL, 438AR
FOR 1000EM2
447AL, 448AR
(2) Put the access platform in position. Subtask 71-50-00-040-050
C. Make the thrust reverser unserviceable (Ref. TASK 78-30-00-481-041). Subtask 71-50-00-010-051
D. Open the thrust reverser doors (Ref. TASK 78-36-00-010-040):
FOR 1000EM1
451AL, 452AR
FOR 1000EM2
461AL, 462AR
F 『 EEFF : ALL E Page 60371-50-00
E E Feb 01/99 ERE
ECES E
F 『
E C F M E
E E
E 56-5B E
E E
4. Procedure
_________
Subtask 71-50-00-210-050
A. Do a general visual inspection of the engine harnesses. Examine all parts and surfaces that can be seen with the harnesses installed on the engine.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM 动力装置 POWER PLANT 2(11)