(3)
Do the EIS Stop procedure (Ref. TASK 31-60-00-860-002).
1EFF : ALL 1 32-51-00Page 514 1 1 Aug 01/05 1 1 1CES 1 1EFF : ALL 1 32-51-00Page 515 1 1 Aug 01/05 1 1 1CES 1R **ON A/C ALL
(4) On the MCDU, push the line key adjacent to the RETURN indication until the CFDS menu page comes into view.
(5) De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
(6) If the front of the aircraft is lifted off the ground, lower the aircraft to the ground (Ref. TASK 07-11-00-586-001).
(7) If the nosewheels are on grease plates, move the aircraft to remove the grease plates (Ref. TASK 09-10-00-584-002).
(8) Make sure that the work area is clean and clear of tool(s) and other items.
R **ON A/C 401-499,
R Subtask 32-51-00-860-053-A
R A. Put the aircraft back to its initial configuration.
R R (1) Depressurize the Yellow hydraulic system (Ref. TASK 29-10-00-864-002).
R (2) Lower the aircraft on its wheels (Ref. TASK 07-12-00-582-001).
R (3) Do the EIS Stop procedure (Ref. TASK 31-60-00-860-002).
R R (4) On the MCDU, push the line key adjacent to the RETURN indication until the CFDS menu page comes into view.
R R (5) De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
R R (6) If the front of the aircraft is lifted off the ground, lower the aircraft to the ground (Ref. TASK 07-11-00-586-001).
R R (7) If the nosewheels are on grease plates, move the aircraft to remove the grease plates (Ref. TASK 09-10-00-584-002).
R R (8) Make sure that the work area is clean and clear of tool(s) and other items.
TASK 32-51-00-720-004 Functional Test of the Nose Wheel Steering with the Pedals. WARNING : MAKE SURE THAT THE CONTROLS AGREE WITH THE POSITION OF THE ITEMS THEY
_______
OPERATE BEFORE YOU PRESSURIZE A HYDRAULIC SYSTEM.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______
CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 04-004 USA MIL-PRF-23827 TYPE I
SYNTH.ESTER BASED GREASE HIGH PRESSURE
(Ref. 20-31-00)
Material No. 04-022 USA MIL-PRF-81322 GRADE 2
SYNTHE.HYDROCARBON GREASE HIGH PRESSURE
(Ref. 20-31-00)
1EFF : ALL 1 32-51-00Page 516 1 1 Aug 01/05 1 1 1CES 1 B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
07-11-00-586-001 Lowering of the Aircraft at Forward Jacking Point,
MLG Wheels on the Ground 07-12-00-582-001 Jacking for Nose Gear Wheel Change 09-10-00-584-002 Towing with the Nose Gear from the Front 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the
External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied from the External Power 29-10-00-863-001 Pressurize the Green Hydraulic System R 29-10-00-863-002 Pressurize the Yellow Hydraulic System 29-10-00-864-001 Depressurize the Green Hydraulic System
R 29-10-00-864-002 Depressurize the Yellow Hydraulic System 31-60-00-860-001 EIS Start Procedure 31-60-00-860-002 EIS Stop Procedure
3. Job Set-up
__________
R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 301-399,
Subtask 32-51-00-860-054
A. Aircraft Maintenance Configuration
(1)
Energize the aircraft electrical circuits (Ref. TASK 24-41-00-861-002).
(2)
Pressurize the Green hydraulic system (Ref. TASK 29-10-00-863-001).
(3)
If the test is to be done with the nosewheels on the ground, do these steps:
NOTE : You will need two 1.2 m (3.93 ft.) square steel plates.
____
(a)
Position a steel plate in front of the nosewheels.
(b)
Apply a thick layer of COMMON GREASE (Material No. 04-004) or COMMON GREASE (Material No. 04-022) to the upper surface of the steel plate.
1EFF : ALL 1 32-51-00Page 517 1 1 Aug 01/05 1 1 1CES 1 NOTE : Do not mix Material No. 04-004 with Material No. 04-022.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM LANDING GEAR 起落架8(80)