(6)
Pressurize the Green hydraulic system (Ref. TASK 29-10-00-863-001).
(7)
On one MCDU, get the SYSTEM REPORT/TEST/L/G page (Ref. TASK 31-32-00-860-009).
Subtask 32-46-00-941-058
B. Safety Precautions
(1)
Put warning notice(s) on the L/G normal control-lever to tell persons not to move it.
(2)
On the nose-wheel steering handwheels and on the rudder pedals, put warning notices in position to tell persons not to operate them.
Subtask 32-46-00-865-057
C. Make sure that this(these) circuit breaker(s) is(are) closed: -------------------------------------------------------------------------------
PANEL ------ DESIGNATION ------------------------------------------------------- IDENT. LOCATION------------------
121VU HYDRAULIC/BRAKING AND STEERING/SYS2/SPLY 4GG M36
121VU HYDRAULIC/BRAKING AND STEERING/SYS2/CTL 3GG M35
121VU HYDRAULIC/BRAKING AND STEERING/SYS1/CTL 1GG M34
121VU HYDRAULIC/BRAKING AND STEERING/SYS1/IND AND/SPLY 2GG M33
Subtask 32-46-00-865-058
D. Open, safety and tag this(these) circuit breaker(s):
------PANEL -------------------------------------------------------DESIGNATION ------------------IDENT. LOCATION
-------------------------------------------------------------------------------121VU ENGINE/ENG2/OIL/PRESS 2EN2 N42 121VU ENGINE/ENG1/OIL/PRESS 2EN1 N40
1EFF : ALL 1 32-46-00Page 516 1 1 Aug 01/05R 1 1 1CES 1
R
4. Procedure_________
R
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, 301-399,
R
Subtask 32-46-00-740-053
A. Do this test:
-------------------------------------------------------------------------------
ACTION RESULT
-------------------------------------------------------------------------------
1.
On the MCDU, push the line key adjacent to the BSCU 1 (BSCU 2) indication.
2.
Push the line key adjacent to the STEERING DATA indication.
3.
Push the line key adjacent to the RETURN indication to get the SYSTEM REPORT/TEST/L/G page.
-
The BSCU SYS 1 (BSCU SYS 2) pagecomes into view.
-
The BSCU SYS 1/STEERING DATA (BSCUSYS 2/STEERING DATA) page comes into view: Read the parameters of the nose wheel steering system.
NOTE : If you want to refresh the
____ parameters of the nose wheel steering system, push the line key adjacent to the REFRESH indication.
1EFF : ALL 1 32-46-00Page 517 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 106-149, 221-299, 401-499,
R Subtask 32-46-00-740-053-A R A. Do this test: R NOTE : This test is for channel 1. For channel 2, use the indications
____ R between parentheses.
R -------------------------------------------------------------------------------R ACTION RESULT R -------------------------------------------------------------------------------
R 1. On the MCDU, push the line key
R adjacent to the BSCU 1(2)
R indication.
R 2. Push the line key adjacent to the
R SPECIFIC DATA indication.
R 3. Push the line key adjacent to the
R STEERING DATA indication.
R
R
R
R
R
R
R
R
R 4. Push the line key adjacent to the
R RETURN indication to get the
R SYSTEM REPORT/TEST/L/G page.
**ON A/C ALL
R
Subtask 32-46-00-865-059
-
the BSCU CHAN 1(2) page comes into view.
-
the BSCU CHAN 1(2)/SPECIFIC DATA page comes into view:
-
the BSCU CHAN 1(2)/SPECIFIC DATA/STEERING DATA page comes into view: Read the parameters of the nose wheel steering system.
NOTE : If you want to refresh the
____ parameters of the nose wheel steering system, push the line key adjacent to the REFRESH indication.
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 2EN1, 2EN2
1EFF : ALL 1 32-46-00Page 518 1 1 Aug 01/05 1 1 1CES 1
R
5. Close-up________
R
Subtask 32-46-00-860-062
A. Put the aircraft back to its initial configuration.
(1) On the MCDU, push the line key adjacent to the RETURN indication until the CFDS menu page comes into view.
(2) Depressurize the Green hydraulic system (Ref. TASK 29-10-00-864-001).
(3) De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
(4) Remove the warning notice(s).
R 1EFF : ALL 1 32-46-00Page 519 1 1 Aug 01/05 1 1 1CES 1
R **ON A/C 106-149, 221-299, 401-499,
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架8(22)
