曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Course Code: 821 JT8D-Standard (2 Days)
850 JT8D-200 (3 Days)
Provides an introduction to engine design features and an
overview of systems, performance and ground operations.
Line and Base Maintenance (8 Days)
ATA Level: III Class Size: 12
Course Code: 823 JT8D-Standard
873 JT8D-200
Designed for maintenance technicians and other personnel
associated with line and base maintenance. This course provides
a detailed description of system operation, component location,
onboard reporting systems and fault isolation procedures to
aircraft maintenance manual level.
Borescope Inspection Procedures (2 Days)
ATA Level: IV Class Size: 4
Course Code: 820 JT8D-Standard
870 JT8D-200
Designed for technicians responsible for performing borescope
inspection of the engine gaspath condition. The course consists
primarily of practical exercises using borescope equipment, a
training engine, mockups and worksheets to develop critical
investigative and interpretative skills to evaluate engine gaspath
condition.
Compressor Blade Blending – All Models
ATA Level: IV Class Size: 2 to 3 (3 Days); 4 (4 Days)
Course Code: 804 JT8D-Standard
854 JT8D-200
Provides important hands-on experience required to develop
necessary investigative and interpretative skills while using
specialized equipment to detect, interpret, evaluate and repair
damage in the compressor gaspath. Customer must supply
blade-blending equipment required for the training.
Heavy Maintenance (B1-B2) (10 Days)
ATA Level: V Class Size: 6 to 8
Course Code: 807 JT8D-Standard
857 JT8D-200
Designed for personnel who are responsible for performing and
supervising limited and major engine assembly and disassembly.
The course provides practical hands-on training on the assembly
and on the disassembly of major build groups, using special
tooling, equipment and appropriate technical manuals.
Troubleshooting (5 Days)
ATA Level: IV Class Size: 12
Course Code: 824 JT8D-Standard
859 JT8D-200
Designed for personnel involved in performing and supervising line
and base engine troubleshooting and fault analysis. The course
provides practical hands-on training on engine features and
systems characteristics.
JT8D-7/-17 and JT8D-200 Engine Series Courses
13
Maximum Heavy Maintenance (B3) – All Models
(See note for class duration.)
ATA Level: V Class Size: 2 to 4
Course Code: 806 JT8D-Standard
856 JT8D-200
Designed for personnel who are responsible for performing and
supervising limited and major engine assembly and disassembly.
The course provides practical hands-on training on the assembly
and on the disassembly of major build groups, using special
tooling, equipment and appropriate technical manuals.
This course is offered only at the customer’s facility using the
customer’s tooling and engine-build groups.
Note: Training days = 3 to 35 days. The number of build groups selected for training
determines total course length.
Post-Maintenance Test (5 Days)
ATA Level: IV Class Size: 10
Course Code: 805 JT8D-Standard
855 JT8D-200
Designed for mechanics, technicians and propulsion engineers
responsible for engine testing and analysis. Students will
develop the skills necessary to perform engine test procedures,
monitor performance and evaluate the engine’s condition.
Practical experience will be gained using test logs and data to
monitor performance and to troubleshoot engines.
JT8D-7/-17 Combustion Chamber Borescope Inspection
(ASB5639) (4 Days)1
ATA Level: IV Class Size: 4 Course Code: 100
Develops skills in using borescope equipment to detect,
interpret and evaluate deterioration and damage in the
combustion chamber of a JT8D-7/-17 engine per ASB5639.
JT8D-200 Combustion Chamber Borescope Inspection
(SB5741) (4 Days)1
ATA Level: IV Class Size: 4 Course Code: 101
Develops skills in using borescope equipment to detect,
interpret and evaluate deterioration and damage in the
combustion chamber of a JT8D-200 engine per SB5741.
JT8D-7/-17 and -200 Borescope Inspection Procedures
Gaspath Special (1 Day)
ATA Level: IV Class Size: 4 Course Code: 102
Develops skills in using borescope equipment to evaluate
deterioration and damage in the engine gaspath.
Note: Attendees must have attended and successfully completed the Combustion
Chamber Borescope Inspection course (no. 100 or 101).
1 Including gaspath, course duration is 5 days.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
航空资料28(154)
