(2)
After protection of the engines, stop the APU (Ref. TASK 49-00-00-860-009).
**ON A/C 051-099,
Subtask 10-11-00-710-056-B
B. Protection of the APU NOTE : You can ignore this step if the last flight cycle was in the last
____ 24 hours (engines and APU operated). In these conditions, the parking period starts from the end of this last flight cycle.
(1)
Start the APU and operate it for at least 5 min at no load governed speed (Ref. TASK 49-00-00-860-003).
(2)
After protection of the engines, stop the APU (Ref. TASK 49-00-00-860-004).
R **ON A/C 106-149, 211-299, 301-399, 401-499,
Subtask 10-11-00-710-056
B. Protection of the APU NOTE : You can ignore this step if the last flight cycle was in the last
____ 24 hours (engines and APU operated). In these conditions, the parking period starts from the end of this last flight cycle.
(1)
Start the APU and operate it for at least 5 min at no load governed speed (Ref. TASK 49-00-00-860-005).
(2)
After protection of the engines, stop the APU (Ref. TASK 49-00-00-860-006).
**ON A/C ALL
Subtask 10-11-00-710-057
C. Protection of the Engines NOTE : You can ignore this step if the last flight cycle was in the last
____ 24 hours (engines and APU operated). In these conditions, the parking period starts from the end of this last flight cycle.
(1)
Start the engines and let them become stable at ground idle for 15 to
20 min (Ref. TASK 71-00-00-710-003).
(2)
Do a thrust reverser full cycle (Ref. TASK 78-31-00-710-042).
(3) Stop the engines (Ref. TASK 71-00-00-710-028).
Subtask 10-11-00-680-056
D. Protection of the Water and Toilet System
(1)
Potable water system
(a) If the parking period is more than 2 days:
-drain, flush and dry the system if necessary (Ref. TASK 12-24-38-680-001).
(2)
Toilet system
(a) If the parking period is more than 2 days:
-drain, flush and disinfect the system if necessary (Ref. TASK 12-16-38-613-001).
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-212, 214-220,
Subtask 10-11-00-170-055
E. Flushing of the Air Data System
(1)
Flush the total pressure line of the Air Data Module (Ref. TASK 34-10-00-170-001).
(2)
Flush the static pressure line of the Air Data Module (Ref. TASK 34-10-00-170-002).
(3)
Drain and flush the standby static and standby total pressure lines of the Air Data Module (Ref. TASK 34-10-00-170-003).
R **ON A/C 106-149, 213-213, 221-299, 301-399, 401-499,
Subtask 10-11-00-170-055-A
E. Flushing of the Air Data System
(1)
Flush the total pressure line of the Air Data Module (Ref. TASK 34-10-00-170-001).
(2)
Flush the static pressure line of the Air Data Module (Ref. TASK 34-10-00-170-002).
(3)
Drain and flush the standby static and standby total pressure lines of the Air Data Module (Ref. TASK 34-22-25-170-001).
**ON A/C ALL
Subtask 10-11-00-620-061
F. Protection of the Windows
(1)
Open the cockpit and cabin window shades.
(2)
Make sure that the sliding window are closed.
(3)
We recommend that you put a SUN SCREEN SET - COCKPIT (25-01-000) in the cockpit on all the windows.
Subtask 10-11-00-620-062
G. Protection of the Seats
(1) We recommend to do the protection of the cockpit and passenger seats with STORAGE PRESERVATION (Material No. 15-002). This is to prevent discoloration by the sun during a long parking period.
**ON A/C 001-003, 051-054,
Subtask 10-11-00-620-063-A
H. Protection of the Doors
(1)
Open the passenger/crew doors (Ref. TASK 52-10-00-010-001).
(2)
Open the cargo compartment doors (Ref. TASK 52-30-00-860-001).
(3)
Open the bulk-cargo door (Ref. TASK 52-30-00-860-006).
(4)
Open all the pressurized access doors.
(5)
Lubricate the external control handles of the passenger/crew doors (Ref. TASK 12-22-52-640-006).
(6)
Lubricate the safety pin guide fitting and the door arming/disarming mechanism (Ref. TASK 12-22-52-640-014).
