-
if premixed fuel with biocide is not available (Ref. TASK 28-11-00-600-004) or (Ref. TASK 28-11-00-600-004).
R (3) Drain water from all the fuel tanks (Ref. TASK 12-32-28-281-001). NOTE : Do the water drain procedure one hour after refueling is
____
completed.
(4)
Do a check of all the fuel tanks for leakage (Ref. TASK 28-11-00-280-002).
(5)
Do a test of the engine LP fuel shut-off valve (Ref. TASK 28-24-00-710-002).
(6)
Do a test of the APU shut-off valve (Ref. TASK 28-29-00-710-001).
(7)
Do a test of the crossfeed valves (Ref. TASK 28-23-00-720-001).
Subtask 10-30-00-710-123
R N. Inspection and Test of the Hydraulic System
(1)
Do an analysis of the hydraulic fluid (Ref. TASK 12-32-29-281-001).
(2)
Do a check of the fluid level in the hydraulic reservoirs (Ref. TASK 29-10-00-200-001).
(3)
Do a test of the hydraulic shut-off valves (Ref. TASK 29-10-00-710-001).
Subtask 10-30-00-710-124
P. Inspection and Test of the Landing Gears
(1)
Do a general visual inspection of the nose landing gear (Ref. TASK 32-21-00-200-002).
(2)
Do an inspection of the main landing gear (Ref. TASK 32-11-00-200-001).
(3)
Lubricate all the landing gears:
-
lubrication of the NLG (Ref. TASK 12-22-32-640-002)
-
lubrication of the MLG (Ref. TASK 12-22-32-640-001).
(4)
Do a test of:
-
the extension and retraction of the landing gear (Ref. TASK 32-31-00-720-002)
-
the free-fall extension (Ref. TASK 32-33-00-720-001).
(5)
Do a test of:
-
the nose wheel steering with the handwheel (Ref. TASK 32-51-00-720-003)
-
the nose wheel steering with the rudder pedals (Ref. TASK 32-51-00-720-004).
Subtask 10-30-00-710-125
Q. Inspection and Operational Test of the Wheels and the Brakes R (1) If the aircraft was in storage with used tires:
(a) Install new tires on the nose landing gear (Ref. TASK 32-41-12-400-001).
(b) Install new tires on the main landing gear (Ref. TASK 32-41-11-400-006).
(c) Do a check of the tire pressure (Ref. TASK 32-41-00-210-003).
(d) If necessary, inflate the tires (Ref. TASK 12-14-32-614-001).
R (2) If the aircraft was in storage with new tires:
R (a) Remove all the wheels and send them to the overhaul shop for inspection of the bearings: - for the nose landing gear (Ref. TASK 32-41-12-000-001) - for the main landing gear (Ref. TASK 32-41-11-000-006).
(b) Put the tires back to the nominal pressure (Ref. TASK 12-14-32-614-001).
(c) Make sure that there are no cracks in the tires (Ref. TASK 32-41-00-210-005).
(3) Do a test of: - the normal braking system (Ref. TASK 32-42-00-710-001) - the alternate braking system (Ref. TASK 32-43-00-710-001).
R **ON A/C 001-049, 101-105, 151-199, 201-210,
Subtask 10-30-00-710-126-A
R. Inspection and Test of the APU
(1) Install the APU, if removed (Ref. TASK 49-11-11-400-004).
(2) Do the APU depreservation (Ref. TASK 49-20-00-600-003).
R **ON A/C 051-099,
R Subtask 10-30-00-710-126-B
R R. Inspection and Test of the APU
R (1) Install the APU, if removed (Ref. TASK 49-11-11-400-001).
R (2) Do the APU depreservation (Ref. TASK 49-20-00-600-001).
R EFF : ALL 10-30-00Page 613 May 01/05 CES R **ON A/C 106-149, 211-299, 301-399, 401-499,
Subtask 10-30-00-710-126
R. Inspection and Test of the APU
(1) Install the APU, if removed (Ref. TASK 49-11-11-400-003).
(2) Do the APU depreservation (Ref. TASK 49-20-00-600-002).
**ON A/C ALL
Subtask 10-30-00-710-127
S. Inspection and Test of the Engine
(1)
Install the engine if removed (Ref. TASK 71-00-00-000-042).
(2)
Do the engine depreservation if it is not removed (Ref. TASK 72-00-00-600-027).
(3)
Do the depreservation of the IDG.
(4)
Change the oil of the pneumatic starter (Ref. TASK 12-13-80-610-001).
(5)
Start the engines, make them turn for one minute (Ref. TASK 71-00-00-710-003) or (Ref. TASK 71-00-00-710-004).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM PARKING, MOORING, STORAGE & RETURN TO S(51)
