(4) Open all the pressurized access doors.
**ON A/C 301-399,
Subtask 10-12-00-010-058-B
A. Get Access
(1)
Open the aft and FWD passenger/crew doors (Ref. TASK 52-10-00-010-001).
(2)
Open the aft and FWD cargo compartment doors (Ref. TASK 52-30-00-860-001).
(3)
Open the emergency exit doors (Ref. TASK 52-22-00-010-001).
(4)
Open the landing gear doors (Ref. TASK 32-12-00-010-001) (Ref. TASK 32-22-00-010-001).
(5)
Open the bulk cargo-compartment door (Ref. TASK 52-30-00-860-006).
(6) Open all the pressurized access doors. R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-212, 214-220,
Subtask 10-12-00-170-053
B. Flushing of the Air Data System
(1)
Flush the total pressure line of the Air Data Module (Ref. TASK 34-10-00-170-001).
(2)
Flush the static pressure line of the Air Data Module (Ref. TASK 34-10-00-170-002).
(3)
Drain and flush the standby static and standby total pressure lines of the Air Data Module (Ref. TASK 34-10-00-170-003).
R **ON A/C 106-149, 213-213, 221-299, 301-399, 401-499,
Subtask 10-12-00-170-053-A
B. Flushing of the Air Data System
(1)
Flush the total pressure line of the Air Data Module (Ref. TASK 34-10-00-170-001).
(2)
Flush the static pressure line of the Air Data Module (Ref. TASK 34-10-00-170-002).
(3)
Drain and flush the standby static and standby total pressure lines of the Air Data Module (Ref. TASK 34-22-25-170-001).
R **ON A/C 001-049, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 10-12-00-620-073
C. Protection of the Landing Gears and the Wheels
(1) Protection of the landing gears
(a)
Apply COMMON GREASE (Material No. 04-011) : - on the sliding tube of the shock absorber - on the actuator rods - on the uplock mechanism.
(b)
Apply COMMON GREASE (Material No. 04-004) :
-
to the towing and debogging fittings
-
to the uplock and downlock mechanisms after cleaning of these mechanisms.
(c)
Apply talcum to all the rubber parts but not the tires.
(d)
Lubricate all the landing gears:
-nose landing gear (Ref. TASK 12-22-32-640-002)
-main landing gear (Ref. TASK 12-22-32-640-001)
(e)
Clean all the actuator rods and apply a thin layer of HYDRAULIC FLUIDS (Material No. 02-003).
(f)
Protect the bottom sections of the landing gears with STORAGE PRESERVATION (Material No. 15-002).
R EFF : 001-049, 101-149, 151-199, 201-299, 10-12-00Page 213 301-399, 401-499, Aug 01/05 CES
(2) Apply SPECIAL MATERIALS (Material No. 05-005) on all hydraulic unions in the NLG, MLG wheel-well bays.
(3) Protection of the wheels
(a) We recommend to install used tires or wheels with used tires: - on the nose landing gear (Ref. TASK 32-41-12-400-001) - on the main landing gear (Ref. TASK 32-41-11-400-006)
(b) Lubricate the bearings with COMMON GREASE (Material No. 04-001).
(c) Make sure that there is no corrosion on the brakes and on each half wheel (Ref. TASK 32-40-00-200-001).
(d) Do a check of the tire pressures (Ref. TASK 32-41-00-210-003).
(e) Protect the brakes and the wheels with STORAGE PRESERVATION (Material No. 15-002).
R **ON A/C 051-099,
R Subtask 10-12-00-620-073-A
R C. Protection of the Landing Gears and the Wheels
R (1) Protection of the landing gears
R R R R (a) Apply COMMON GREASE (Material No. 04-011): - on the sliding tube of the shock absorber, - on the actuator rods, - on the uplock mechanism.
R R R R (b) Apply COMMON GREASE (Material No. 04-004) : - to the towing and debogging fittings - to the uplock and downlock mechanisms after cleaning of these mechanisms.
R (c) Apply talcum to all the rubber parts but not the tires.
R R R (d) Lubricate all the landing gears: - nose landing gear (Ref. TASK 12-22-32-640-002) - main landing gear (Ref. TASK 12-22-32-640-001)
R R (e) Clean all the actuator rods and apply a thin layer of HYDRAULIC FLUIDS (Material No. 02-003).
R (f) Protect the bottom sections of the landing gears with STORAGE
R PRESERVATION (Material No. 15-002).
R (2) Apply SPECIAL MATERIALS (Material No. 05-005) on all hydraulic unions
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM PARKING, MOORING, STORAGE & RETURN TO S(24)
