(10)
Depressurize the aircraft hydraulic systems (Ref. TASK 29-23-00-864-001), (Ref. TASK 29-24-00-864-001), (Ref. TASK 29-10-00-864-003).
(11)
De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
(12)
Remove all the fixtures, tools, test and support equipment used during this procedure.
(13)
Make an entry in the aircraft log book or attach a tag on the Captain side stick to tell the crew that the protection covers/devices are installed.
R EFF : 301-399, 10-12-00Page 251 May 01/05 CES
**ON A/C ALL
TASK 10-12-00-553-008
Renewal for 6 Months Storage Period
1. Reason for the Job
__________________
This procedure gives the operator the possibility to do the storage procedure of 6 months again one time.
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific 1 ACCESS PLATFORM 15M (49 FT) - ADJUSTABLE
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
10-12-00-200-009 Periodic ground-check at 3-month interval
12-22-27-640-003 Lubrication of Trimmable Horizontal Stabilizer
Actuator Ball Screw Nut
12-22-27-640-004 Lubrication of all Flap Track Carriage Rollers
12-22-27-640-005 Lubrication of Spoiler No.1 to 5 Servo Control
Bearings
12-22-27-640-006 Lubrication of all Slat Track Rollers, Pinion
Bearings, Pinions and Rack Teeth 12-22-27-640-007 Lubrication of the THS Mechanical Control Chains 12-22-32-640-001 Lubrication of the MLG and Doors 12-22-32-640-002 Lubrication of the NLG and Doors 12-22-53-640-001 Lubrication of Trimmable Horizontal Stabilizer
Bearings and Attachment Fittings
12-22-55-640-001 Lubrication of the Rudder Bearing No. 6
12-32-28-281-001 Drain Water Content
12-32-28-281-003 Sample Fuel for Microbiological Contamination
Analysis 12-32-28-281-004 Fuel Sampling for a Microbiological Contamination R Test with a Microb Monitor Test Kit (OBSOLETE)
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R R R R R R 20-24-11-100-001 28-11-00-600-004 28-11-00-600-004 28-11-00-600-004 28-11-00-600-004 28-11-00-600-007 28-11-00-600-007 28-11-00-600-007 28-11-00-600-007
3. Job Set-up__________
Subtask 10-12-00-941-056
A. Get Access
Cleaning and Protection of the CablesBiobor Biocidal Shock Treatment - With Fuel Mixed with Biocide Additive (OBSOLETE)Kathon Biocidal Shock Treatment - With Fuel Mixed with Biocide Additive (OBSOLETE)Biobor Biocidal Shock Treatment - When Fuel Mixed with Biocide Additive is not Available (OBSOLETE)Kathon Biocidal Shock Treatment - When Fuel Mixed with Biocide Additive is not Available (OBSOLETE)Introduce Biobor Biocide into Fuel - With Fuel Mixed with Biocide Additive (OBSOLETE)Introduce Kathon Biocide into Fuel - With Fuel Mixed with Biocide Additive (OBSOLETE)Introduce Biobor Biocide into Fuel - When Fuel Mixed with Biocide Additive is not Available (OBSOLETE)Introduce Kathon Biocide into Fuel - When Fuel Mixed with Biocide Additive is not Available (OBSOLETE)
(1) Put an ACCESS PLATFORM 15M (49 FT) - ADJUSTABLEin position near the aircraft. _________
4. Procedure
Subtask 10-12-00-553-070
A. Ground Check
(1) Do the periodic ground check at 3-month intervals (Ref. TASK 10-12-00-200-009).
Subtask 10-12-00-620-095
B. Protection
(1)
Lubrication of the mechanical control chains of the THS (Ref. TASK 12-22-27-640-007) and the actuator ball screw nut (Ref. TASK 12-22-27-640-003) .
(2)
Clean and protect the flight control cables (Ref. TASK 20-24-11-100-001).
(3)
Lubrication of the rollers of the flap tracks (Ref. TASK 12-22-27-640-004).
(4)
Lubrication of all the rollers and pinions of the slat tracks (Ref. TASK 12-22-27-640-006).
(5)
Lubrication of spoiler servo control bearings (Ref. TASK 12-22-27-640-005).
(6)
Lubrication of the hinges and the attach fittings of the horizontal stabilizer (Ref. TASK 12-22-53-640-001).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM PARKING, MOORING, STORAGE & RETURN TO S(38)
