曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
When the TERR pushbutton is switched OFF, the ECAM message “NAV GPWS TERR DET FAULT”
is displayed only the basic GPWS Modes 1 to 5 remain operative.
If the TERR ON ND is not selected, and a terrain alert is generated, the terrain is automatically
displayed on the ND.
The brightness of the terrain indication on the ND is controlled via the weather radar brightness
control knob. If the weather radar brightness was set to low (due to bad weather) and a terrain alert
occurs, then the terrain display brightness will also be low.
Therefore, when a terrain alert occurs, the ND weather/terrain image brightness may need to be
adjusted.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
SUPPLEMENTARY PROCEDURES
NAVIGATION
A318/A319/A320/A321 FLEET PRO-SUP-34 P 27/28
FCOM 19 AUG 10
ENHANCED GROUND PROXIMITY WARNING SYSTEM (EGPWS)
Applicable to:
,
,
MSN,,,,
The Flight Management System (FMS) provides aircraft position inputs to the EGPWS for enhanced
function processing purpose.
The TERR pushbutton located on the overhead panel enables the activation or deactivation of the
enhanced functions of the EGPWS.
If the TERR ON ND is not selected, and a terrain alert is generated, the terrain is automatically
displayed on the ND.
The brightness of the terrain indication on the ND is controlled via the weather radar brightness
control knob. If the weather radar brightness was set to low (due to bad weather) and a terrain alert
occurs, then the terrain display brightness will also be low.
Therefore, when a terrain alert occurs, the ND weather/terrain image brightness may need to be
adjusted.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
SUPPLEMENTARY PROCEDURES
NAVIGATION
Intentionally left blank
A318/A319/A320/A321 FLEET PRO-SUP-34 P 28/28
FCOM 19 AUG 10
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
SUPPLEMENTARY PROCEDURES
INFORMATION SYSTEMS
A318/A319/A320/A321 FLEET PRO-SUP-46 P 1/12
FCOM 19 AUG 10
ATSU INITIALIZATION
Applicable to:
ATSU is automatically initialized, provided a list of Service Providers has been scanned, and
provided the following three parameters have been received and validated by the ATSU:
‐ Aircraft Registration Number (ARN)
‐ ACARS Airline Identity code (ACARS A/L ID).
‐ Standard Airline Identity code (STANDARD A/L ID)
If one of the above four conditions is not fulfilled, then ATSU is not available:
‐ The ECAM displays ACARS STBY,
and
‐ The MCDU scratchpad displays a message to request flight crew action.
A manual entry of the missing parameter reinitializes the ATSU, and clears the ECAM and MCDU
message.
If ARN is not valid:
The MCDU scratchpad displays the “ENTER A/C REGISTER” message. After clearing the
scratchpad, the crew writes the ARN on the scratchpad. Pressing the 2L key on the COMM
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
SUPPLEMENTARY PROCEDURES
INFORMATION SYSTEMS
A318/A319/A320/A321 FLEET PRO-SUP-46 P 2/12
FCOM 19 AUG 10
CONFIG SD page enters the ARN in the 2L field. The flight crew has to press the 1R key to
activate it.
If the A/L ID is not valid:
The MCDU scratchpad displays the “ENTER A/L IDENT” message. After clearing the
scratchpad, enter the two-letter A/L ID code on the scratchpad. Press the 3L key to enter the A/L
ID code in the 3L field. Repeat the same operation for the three-letter A/L ID code, by using the
4L key instead of the 3L key. The flight crew has to press the 1R key to activate it.
If the VHF3 SCAN SELECT menu can be accessed, and if no VHF Service Providers have
been selected:
The MCDU scratchpad displays the “ENTER VHF3 SCAN SELECT” message.
On the VHF3 SCAN SELECT SD page, select a Service Providers' list, in the airline priority
order, and activate the VHF SCAN SELECT function.
Example: To select Service Providers SITA 725 and ARINC:
1. Press the 5L key: The star next to the SELECT indication disappears, then reappears.
2. Press the 1L key to select SITA 725: The SELECT indication goes off, and the priority number
of selection # 1 appears.
3. Press the 1R key to select ARINC: The SELECT indication goes off, and the priority number of
selection # 2 appears.
4. Press the 5R key to activate the VHF SCAN SELECT function: The star next to the SCAN
SELECT ACTIVATE indication disappears, then reappears.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
SUPPLEMENTARY PROCEDURES
INFORMATION SYSTEMS
A318/A319/A320/A321 FLEET PRO-SUP-46 P 3/12
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
A320机组操作手册FLIGHT CREW OPERATING MANUAL 14(98)
