曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Green bars on the selected system key light up.
Microphones and PTT command are connected to the selected system.
VHF or HF reception key....................................................................................................... PRESS
The integrated white light comes on.
The receiver brings in the selected system.
To adjust the volume, turn the key.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
SUPPLEMENTARY PROCEDURES
COMMUNICATIONS
A318/A319/A320/A321 FLEET PRO-SUP-23 P 5/10
FCOM 19 AUG 10
Applicable to:
,
,
MSN,,,,
TRANSMISSION AND RECEPTION
Note: If the VHF3 VOICE DIRECTORY page is customized with user frequencies :
‐ Use it as a pure directory.
‐ Do not press the key adjacent to the desired frequency for direct turning.
‐ VHF3 in VOICE mode should either be tuned using the MANUAL FREQ field, or using
the RMP.
VHF or HF transmission key.................................................................................................. PRESS
Green bars on the selected system key light up.
Microphones and PTT command are connected to the selected system.
VHF or HF reception key....................................................................................................... PRESS
The integrated white light comes on.
The receiver brings in the selected system.
To adjust the volume, turn the key.
Note: Do not use VHF 3 for communications with ATC, if ACARS is intalled, unlessVHF 1 and
VHF 2 are inoperative.
CAPT- ATT CALL
Applicable to: ALL
PROCEDURE FOR CALLING ATT STATION WHEN PREVIOUS CALL HAS NOT BEEN RESET
If, after a call from cockpit to the attendant’s station, the attendant does not press the RESET key
on the attendant’s panel, the pilot must use the following procedure to call the station :
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
SUPPLEMENTARY PROCEDURES
COMMUNICATIONS
A318/A319/A320/A321 FLEET PRO-SUP-23 P 6/10
FCOM 19 AUG 10
CAB transmission key (on audio control panel).....................................................................PRESS
Green lines light up.
INT/RAD (on ACP)................................................................ MAINTAIN IN RAD POSITION for 2 s.
Wait 60 s for automatic cancellation of previous CAPT-ATT calls, then :
CAB transmission key............................................................................................................ PRESS
Note: This procedure will no longer be necessary after the introduction of CIDS Mark II
standard, which includes a function to reset the system automatically after 60 s if no one
has pressed the RESET key.
SATCOM
Applicable to:
This chapter explains how to use the different Satellite Communication (SATCOM) functions for
Cockpit air to ground or ground to air communications.
Due to highly customized programming, the SATCOM functions may vary for different airlines. This
description is, therefore, given only as an example.
COCKPIT AIR TO GROUND COMMUNICATION
The crew selects the phone number via the MCDU then, initiates and terminates the call via the
ACPs.
PHONE NUMBER SELECTION
PRESS the SAT key on the MCDU main page to access the SATCOM MAIN MENU page.
PRESS the MANUAL DIAL or DIRECTORY key.
For air to ground communication, the crew can use the SATCOM manual dialing function or the
prerecorded phone numbers.
Manual dialing
On the SATCOM MANUAL DIAL page :
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
SUPPLEMENTARY PROCEDURES
COMMUNICATIONS
A318/A319/A320/A321 FLEET PRO-SUP-23 P 7/10
FCOM 19 AUG 10
PRESS the slew up or down keys on the MCDU keyboard to select the priority (The default
priority is NON-SAFETY).
PRESS 4L to modify the SATCOM channel (after having entered the desired SATCOM
channel in the scratchpad).
ENTER the phone number in the scratchpad and PRESS 2L.
PRESS 6R to preselect the phone number.
The MCDU then switches to the SATCOM MAIN MENU page automatically.
Prerecorded phone number
On the SATCOM DIRECTORY page :
PRESS 1L, 2L, 3L or 4L
The MCDU switches to the CATEGORY NUMBER page, where phone numbers have been
stored according to their priority. (Example : SATCOM SAFETY) :
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
SUPPLEMENTARY PROCEDURES
COMMUNICATIONS
A318/A319/A320/A321 FLEET PRO-SUP-23 P 8/10
FCOM 19 AUG 10
PRESS 1 R (after having entered the desired SATCOM channel in the scratchpad) to modify
the SATCOM channel.
PRESS the key (1L, 2L, 3L, 4L or 5L) facing the required phone number.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
A320机组操作手册FLIGHT CREW OPERATING MANUAL 14(69)
