曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
This interchanges the ACTIVE and STBY frequencies.
The receiver is now tuned to the new ACTIVE frequency.
AM key (if necessary).........................................................................................................PRESS
Green light comes on.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
SUPPLEMENTARY PROCEDURES
COMMUNICATIONS
A318/A319/A320/A321 FLEET PRO-SUP-23 P 2/10
FCOM 19 AUG 10
SEL lt......................................................................................................................... CHECK OFF
If SEL light is on, select the appropriate radio systems dedicated to the on side RMP.
FAILURE CASES
When an RMP fails :
The affected RMP no ‐ longer controls the selected receiver.
‐ The frequency displays disappear and the green VHF or HF lights go out.
Affected RMP........................................................................................................... SWITCH OFF
One RMP can control all receivers.
Applicable to:
,
,
MSN,,,,
TUNING
The pilot should normally use his onside RMP to tune any one of the VHF or HF radios. If the SEL
lights come on, when tuning the radio, the pilot should turn them off by selecting the appropriate
radio system dedicated to his RMP.
ON/OFF switch................................................................................................................ CHECK ON
VHF or HF key....................................................................................................................... PRESS
The green light comes on.
ACTIVE and STBY/CRS windows display active and preset frequencies, respectively.
Note: When an RMP tunes a transceiver that is normally associated with another RMP, the
SEL lights on both RMPs come on.
TO CHANGE FREQUENCY
Rotating knob........................................................................................................................TURN
Make the STBY/CRS window display the new frequency.
Outer knob is for units, inner knob for decimals.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
SUPPLEMENTARY PROCEDURES
COMMUNICATIONS
A318/A319/A320/A321 FLEET PRO-SUP-23 P 3/10
FCOM 19 AUG 10
Transfer key........................................................................................................................PRESS
This interchanges the ACTIVE and STBY frequencies.
The receiver is now tuned to the new ACTIVE frequency.
AM key (if necessary).........................................................................................................PRESS
Green light comes on.
SEL lt......................................................................................................................... CHECK OFF
If SEL light is on, select the appropriate radio systems dedicated to the on side RMP.
FAILURE CASES
When an RMP fails :
The affected RMP no ‐ longer controls the selected receiver.
‐ The frequency displays disappear and the green VHF or HF lights go out.
Affected RMP........................................................................................................... SWITCH OFF
One RMP can control all receivers.
• if RMP 1 fails tune VHF 1 through RMP 3
• if RMP 2 fails tune VHF 2 through RMP 3
• if RMP 3 fails tune, HF 1 through RMP 1, HF 2 through RMP 2
• if two RMP’s fail, tune all receivers through the remaining RMP.
Applicable to:
TRANSMISSION AND RECEPTION
VHF or HF transmission key.................................................................................................. PRESS
Green bars on the selected system key light up.
Microphones and PTT command are connected to the selected system.
VHF or HF reception key....................................................................................................... PRESS
The integrated white light comes on.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
SUPPLEMENTARY PROCEDURES
COMMUNICATIONS
A318/A319/A320/A321 FLEET PRO-SUP-23 P 4/10
FCOM 19 AUG 10
The receiver brings in the selected system.
To adjust the volume, turn the key.
Note: Do not use VHF 3 for communications with ATC, if ACARS is intalled, unlessVHF 1 and
VHF 2 are inoperative.
Applicable to:
TRANSMISSION AND RECEPTION
Note: If the VHF3 VOICE DIRECTORY page is customized with user frequencies :
‐ Use it as a pure directory.
‐ Do not press the key adjacent to the desired frequency for direct turning.
‐ VHF3 in VOICE mode should either be tuned using the MANUAL FREQ field, or using
the RMP.
VHF or HF transmission key.................................................................................................. PRESS
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
A320机组操作手册FLIGHT CREW OPERATING MANUAL 14(68)
