757
MAINTENANCE MANUAL
PASSENGER COMPARTMENT AIR CONDITIONING OUTLET
SEE A
AIR CONDITIONING OUTLET
SEE B
PASSENGER COMPARTMENT AIR CONDITIONING OUTLET (EXAMPLE)
A
Air Conditioning System Outlets Figure 401 (Sheet 1)
H63397
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-23-02
ALL ú ú 07 Page 402 ú Sep 20/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
FLEX DUCT
SEE C
CONDITIONING OUTLET AIR
SCREWS
INBD FWD AIR CONDITIONING OUTLET (EXAMPLE) B EXTRUSION AIR CONDITIONING EXTRUSION AIR CONDITIONING PANEL SIDEWALL SPRING CLIPS 1 TAPE FLEX DUCT
INBD
SCREWS PANEL SIDEWALL FWD
1 INSTALLED ON SOME AIRPLANES C AIR CONDITIONING OUTLET (EXAMPLE)
Figure 401 (Sheet 2) Air Conditioning System Outlets
H63978
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-23-02
ALL ú ú 08 Page 403 ú Sep 20/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
D. Remove the Outlet
S 024-041
(1)
Remove the tape from the joint between the outlet and the flex duct.
S 024-032
(2)
If not already done, remove the tape that attaches the gasper hose, if installed, to the air outlet.
S 024-036
(3)
Remove the two screws from the front of the outlet.
S 024-040
(4)
Remove the two screws at the bottom rear of the outlet.
S 024-028
(5)
Remove the air outlet from the air conditioning extrusion.
TASK 21-23-02-404-016
3. Install the Sidewall Outlet (Fig. 401)___________________________
A. Consumable Materials
(1)
A00922 - Sealant - RTV133
(2)
B00316 - Solvent - Aliphatic Naphtha, TT-N-95
(3)
G00093 - Tape, G-565
B.
References
(1)
24-22-00/201, Electric Power - Control
(2)
25-28-02/401, Overhead Stowage Bin
(3)
51-31-01/201, Seals and Sealing
C.
Access
(1)
Location Zones
221/222 Passenger cabin - section 41
231/232 Passenger cabin - section 43
241/242 Passenger cabin - section 44
251/252 Passenger cabin - section 46
D.
Install the Outlet
(1)
Use a file to remove any burrs from the edges of the outlet.
(2)
Put the outlet into the air conditioning extrusion.
S 424-043
(3)
Install the two screws at the front of the outlet and the two screws at the bottom rear of the outlet.
S 434-044
(4)
Pull the flex duct onto the outlet, so it overlaps the outlet by 0.5 to 1 inch (13-25 mm).
S 844-015
S 424-042
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-23-02
ALL ú ú 07 Page 404 ú Sep 20/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
S 164-045
(5)
Use the solvent to clean the surfaces of the flex duct and the outlet which will have the tape on them.
S 434-046
(6)
Install two layers of the tape to the center of the joint.
(a)
Make sure the tape is smooth and tight.
E.
Put the airplane back to its usual condition
S 414-004
(1)
Install the overhead stowage bin (AMM 25-28-02/401).
S 864-003
(2)
Remove DO-NOT-OPERATE tags from the L and R PACK selectors, on the P5 panel.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 空调 AIR CONDITIONING 1(49)
