(6)  
Disconnect the bonding jumper assembly (4) from the fan.
 (7)  
Remove the clamps (5) (4 locations).
 S 014-005
 S 034-031
 S 034-007
 S 034-008
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 21-43-04
 ALL  ú ú 02 Page 401 ú May 20/98 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A
757 
MAINTENANCE MANUAL
FWD CARGO HEATING  
INTAKE GRILL  
FWD CARGO  SEE  B  
HEATING  
FLOW FAN  
SEE  A  
1. BOLT (2 LOCATIONS)  
2. WASHER (2 LOCATIONS)  
3. NUT (2 LOCATIONS)  
4. JUMPER  
ASSEMBLY  
(BONDING)  
15. FAN BRACKET  
14. FAN  
SUPPORT ROD  5. CLAMP  
(4 LOCATIONS)  
6. HOSE (2 LOCATIONS)  
7. FAN  
8. ELECTRICAL  
CONNECTOR  
9. NUT (TOP NUT)  
10. ISOLATOR  
11. BOLT (2 LOCATIONS)  
12. WASHER (2 LOCATIONS)  FWD  INBD  
13. NUT (2 LOCATIONS)  
HEATING FWD CARGO  FORWARD CARGO HEATING FLOW FAN  
INTAKE DUCT  A  
INTAKE  
GRILL 
WIRE FILTER 
FWD CARGO HEATING INTAKE GRILL B 
Forward Cargo Heating Flow Fan - Installation Figure 401 
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 21-43-04
 ALL  ú ú 02 Page 402 ú Jun 20/90 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A
757 
MAINTENANCE MANUAL
 S 034-009
 (8)  
Move the hose (6) (2 locations) away from fan (7).
S 034-010
 (9)  
Remove the bolts (1) from the isolators (9) in the top fan bracket (15) (2 locations).
S 034-011
 (10)
 Disconnect the fan (7) at the lower bracket.
 (a)  
Remove the top nut (9) from the fan support rod (14).
 (b)  
Remove the bolts (11) (2 locations) that connect the isolator (10) to the fan bracket.
 (c)  
Remove the isolator (10).
 S 024-012
 (11) Remove the fan (7).
 TASK 21-43-04-404-013
 3. Install the Forward Cargo Heating Flow Fan (Fig. 401)
__________________________________________
 A. Equipment
 (1)  
Cooling Source - ice pack, Commercially
 available
 (2)  
Thermometer - hand-held type, range 40-80°F
 (0-30°C), Commercially available.
 (3)  
Vacuum - Commercially available.
 B. 
Parts
 ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT |FIG | ITEM | ................................................................................ | 401 | 1 | Bolt | 21-43-03 | 02 | 45 | | | 2 | Washer | | | 60 | | | 3 | Nut | | | 70 | | | 4 | Jumper Assembly | | | 15 | | | 5 | Clamp | | | 155 | | | 6 | Hose | | | 120 | | | 7 | Fan | | | 95 | | | 9 | Nut | | | 85 | | | 10 | Isolator | | | 80 | | | 11 | Bolt | | | 55 | | | 12 | Washer | | | 60 | | | 13 | Nut | | | 70 | 2......…........…...................................…...........….....…........1
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 21-43-04
 ALL  ú ú 01 Page 403 ú May 28/01 
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. 
A
757 
MAINTENANCE MANUAL
 C. References
 (1)  
06-46-00/201, Entry, Service and Cargo Doors, Access Doors and Panels
 (2)  
24-22-00/201, Electric Power Control
 (3)  
25-50-03/401, Bulkhead Lining Panels
D. 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址:757 AMM 飞机维护手册 空调 AIR CONDITIONING 1(133)