S 434-010
(2)
Install the washers and coupling nut on the differential pressure sensor. Tighten against the tee connector.
S 434-011
(3)
Install the electrical connector on the differential pressure sensor.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-33-04
ALL ú ú 01 Page 403 ú Jun 20/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
(4) S 864-012Remove the DO-NOT-CLOSE tags and close these circuit breakers on the P11 panel: (a) 11B12, CABIN DIFF PRESS IND (b) 11B13, CABIN ALTM
(5) S 864-013Supply electrical power (Ref 24-22-00)
(6) S 214-014Make sure the differential pressure indicator moved from OFF to approximately 0.
NOTE:____ The differential pressure indicator is on the pressurization indication and warning module on the P5 panel.
(7) S 414-015Close the forward equipment bay access door (119BL).
(8) S 864-016Remove electrical power, if it is not necessary.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-33-04
ALL ú ú 01 Page 404 ú Jun 20/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
1.
2.
3.
757 MAINTENANCE MANUAL
CABIN ALTITUDE WARNING SWITCH - REMOVAL/INSTALLATION
____________________________________________________General
_______
A. This procedure contains two tasks. The first task is the removal of the cabin altitude warning switch. The second task is the installation of the cabin altitude warning switch.
B. Some airplanes have an additional high cabin altitude warning switch installed. The procedure for the removal and installation of the high cabin altitude warning switch is the same as the procedure for the removal and installation of the cabin altitude warning switch.
TASK 21-33-05-004-018
Cabin Altitude Warning Switch Removal (Fig. 401)
_____________________________________
A. References
(1)
AMM 06-41-00/201, Fuselage Access Doors and Panels
B.
Access
(1)
Location Zones
119 Main Equipment Center, Left
120 Main Equipment Center, Right
C.
Procedure
S 864-019
(1)
Open the E/E bay access door 119AL (AMM 06-41-00).
S 024-020
(2)
Find the cabin altitude warning switch on the left miscellaneous electrical equipment panel, P36.
S 024-021
(3)
Disconnect the electrical connector.
S 024-022
(4)
Remove the bolts, washers, and nuts which attach the switch to the panel.
S 024-023
(5)
Remove the switch and it's support bracket.
TASK 21-33-05-404-024
Cabin Altitude Warning Switch Installation (Fig. 401).
__________________________________________
A. References
(1)
AMM 06-41-00/201, Fuselage Access Doors and Panels
B.
Access
(1)
Location Zones
119 Main Equipment Center, Left
120 Main Equipment Center, Right
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
21-33-05
ALL ú ú 01 Page 401 ú Sep 20/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
SECTION C SEE
LEFT MISCELLANEOUS ELECTRICAL EQUIPMENT PANEL, P36
Cabin Altitude Warning Switch - Removal/Installation
Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：757 AMM 飞机维护手册 空调 AIR CONDITIONING 1(125)
