- replace the EGT THERMOCOUPLE 2 (8057KM2) (Ref. AMM TASK 49-72-15-000-001) and (Ref. AMM TASK 49-72-15-400-002).
(1) If the fault continues:
- do a check and repair the wiring from the ECB (59KD) AB/A9, A8 to the EGT THERMOCOUPLE 2 (8057KM2) P31/1, 2 (Ref. ASM 49-61/02).
(a) If the fault continues:
- replace the ECB (59KD) (Ref. AMM TASK 49-61-34-000-002) and (Ref. AMM TASK 49-61-34-400-002).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 106-106, 108-149, 211-299, 301-399, ∞∞49-70-00∞∞∞∞∞∞∞∞∞∞Page 206
Config-3 Aug 01/05 CES
B. Do the test given in para. 3.
TASK 49-70-00-810-815
Engine Identification-Module Fault (APS 3200)
1. Possible Causes
_______________
- ENGINE IDENTIFICATION MODULE (8061KM)
- wiring
- ECB (59KD)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 49-00-00-710-005 Self-Test of the ECB (APS 3200) AMM 49-61-34-000-002 Removal of the Electronic Control Box (ECB) (59KD) (APS 3200) AMM 49-61-34-400-002 Installation of the Electronic Control Box (ECB) (59KD) (APS 3200) AMM 49-73-31-000-001 Engine Identification Module (8061KM) - Removal (APS 3200) AMM 49-73-31-400-001 Engine Identification Module (8061KM) - Installation (APS 3200) ASM 49-61/02
3. Fault Confirmation
__________________
A. Do the self-test of the ECB (59KD) (Ref. AMM TASK 49-00-00-710-005).
4. Fault Isolation
_______________
A. If the APU Class 3 Faults Page gives the maintenance message:
SERIAL NUMBER ENCDR (8061KM):
Fault Code Number: 041 or 130
- replace the ENGINE IDENTIFICATION MODULE (8061KM) (Ref. AMM TASK 49-73-31-000-001) and (Ref. AMM TASK 49-73-31-400-001).
(1) If the fault continues:
- do a check and repair the wiring from the ECB (59KD) AB/D9, J7, J8, D10 to the ENGINE IDENTIFICATION MODULE (8061KM) P20/5, 14, 10, 9 (Ref. ASM 49-61/02).
(a) If the fault continues:
- replace the ECB (59KD) (Ref. AMM TASK 49-61-34-000-002) and (Ref. AMM TASK 49-61-34-400-002).
B. Do the test given in para. 3.
OIL ((GTCP 36-300)) - FAULT ISOLATION PROCEDURES
________________________________________________
R **ON A/C 001-003, 051-099, 401-499,
TASK 49-90-00-810-802
Oil Filter Switch Fault (GTCP 36-300)
1. Possible Causes
_______________
- wiring
- OIL FILTER DIFFERENTIAL PRESSURE SWITCH P9 of the lube pump filter
- OIL FILTER DIFFERENTIAL PRESSURE SWITCH P5 of the gen scavenge pump filter
- ECB (59KD)
- OIL FILTER DIFFERENTIAL PRESSURE SWITCH (8070KM) of the lube pump filter
- OIL FILTER DIFFERENTIAL PRESSURE SWITCH (8071KM) of the gen scav pump filter
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 49-00-00-710-001 Self-Test of the ECB (59KD) (GTCP 36-300) AMM 49-61-34-000-001 Removal of the Electronic Control Box (ECB) (59KD) (GTCP 36-300) AMM 49-61-34-400-001 Installation of the Electronic Control Box (ECB) (59KD) (GTCP 36-300) AMM 49-91-14-000-001 Removal of the Generator Scavange Differential Pressure Switch (GTCP36-300) AMM 49-91-14-400-001 Installation of the Generator Scavange Differential Pressure Switch (GTCP 36-300) AMM 49-91-15-000-001 Removal of the Oil Pump Differential Pressure -Switch (GTCP36-300) AMM 49-91-15-400-001 Installation of the Oil Pump Differential Pressure -Switch (GTCP36-300) ASM 49-61/02
3. Fault Confirmation
__________________
A. Do the self test of the APU (Ref. AMM TASK 49-00-00-710-001).
4. Fault Isolation
_______________
**ON A/C 001-003, 051-062,
A. If the test gives the maintenance message:
LUBE PMP FILTER SW P9 OR GEN SCAV FILTER SW P5
- do a check and repair the wiring from the ECB (59KD) AB/C11 to the OIL FLITER DIFFERENTIAL-SWITCH P9 (lube pump filter) and P5 (generator scavenge filter) (Ref. ASM 49-61/02).
(1) If the fault continues:
- replace the OIL FILTER DIFFERENTIAL PRESSURE SWITCH P9 of the lube pump filter (Ref. AMM TASK 49-91-15-000-001) and (Ref. AMM TASK 49-91-15-400-001). 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320 Trouble Shooting Manual 排故手册 机载辅助动力 2(170)
