(2)
Put a warning notice in the cockpit to tell persons not to operate the slat controls.
Subtask 27-84-62-010-052
B. Get Access
(1)
Remove the applicable Slat:
-
for the Slat tracks 5 and 6, remove the Slat No. 2 (Ref. TASK 27-84-64-000-001)
-
for the Slat tracks 7 and 8, remove the Slat No. 3 (Ref. TASK 27-84-65-000-001)
-
for the Slat tracks 9 and 10, remove the Slat No. 4 (Ref. TASK 27-84-66-000-001)
-
for the Slat tracks 11 and 12, remove the Slat No. 5 (Ref. TASK 27-84-67-000-001).
(2)
Remove the applicable Slat track (Ref. TASK 27-84-62-000-001).
(3)
Make sure that the TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER (98D27803500001) is on the flap/slat control lever on panel 114VU.
(4) For the Slat track 5, remove: R **ON A/C 001-049, 051-061, 101-105, 201-203,
(Ref. Fig. 601/TASK 27-84-62-991-008)
Slat 2, Track 5 - Attachment Details
Figure 601/TASK 27-84-62-991-008
R 1EFF : 001-049, 051-061, 101-105, 201-203, 1 27-84-62Page 604 1 1 May 01/05 1 1 1CES 1R **ON A/C 062-099, 106-149, 151-199, 204-299, 301-399, 401-499,
(Ref. Fig. 601A/TASK 27-84-62-991-008-A)
**ON A/C ALL
(a)
the nut (16), the locking plate (17), the nut (7), the washer (6), the bolt (15) and the eccentric bush (14).
(b)
the links (8) and (10) and the bolt (18). NOTE : The bolts (1) and (19) and their related nuts and washers
____ were removed when the Slat No. 2 was removed.
(5) For the Slat track 6, remove:
(Ref. Fig. 602/TASK 27-84-62-991-009)
(a)
the nuts (15), the washers (14), the bolts (18) and the two links (16).
(b)
the nut (21), the locking plate (19), the nut (13), the washer (12), the bolt (4) and the eccentric bush (5).
(c)
the links (9) and (11) and the bolt (20). NOTE : The bolts (3) and their related nuts and washers were
____ removed when the Slat No. 2 was removed.
(6) For the Slat track 7, remove:
(Ref. Fig. 603/TASK 27-84-62-991-010)
(a)
the nut (10), the locking plate (11), the nut (4), the washer (5), the bolt (15) and the eccentric bush (6).
(b)
the links (14) and (21) and the bolt (12). NOTE : The bolts (3) and (16) and their related nuts and washers
____ were removed when the Slat No. 3 was removed.
(7) For the Slat track 8, remove:
(Ref. Fig. 604/TASK 27-84-62-991-011)
(a) the nuts (17), the washers (16), the bolts (20) and the two links (18).
Slat 2, Track 5 - Attachment Details
Figure 601A/TASK 27-84-62-991-008-A
R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 27-84-62Page 606 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1
Slat 2, Track 6 - Attachment Details Figure 602/TASK 27-84-62-991-009
1EFF : 1 1R 1CES ALL 1 11 1 27-84-62 Page 607 Feb 01/01
Slat 3, Track 7 - Attachment Details Figure 603/TASK 27-84-62-991-010
1EFF : 1 1R 1CES ALL 1 11 1 27-84-62 Page 608 Feb 01/01
Slat 3, Track 8 - Attachment Details Figure 604/TASK 27-84-62-991-011
1EFF : 1 1R 1CES ALL 1 11 1 27-84-62 Page 609 Feb 01/01
(b)
the nut (9), the locking plate (10), the nut (15), the washer (14), the bolt (4) and the eccentric bush (5).
(c)
the links (13) and (21) and the bolt (11). NOTE : The bolts (3) and their related nuts and washers were
____ removed when the Slat No. 3 was removed.
(8) For the Slat track 9, remove:
(Ref. Fig. 605/TASK 27-84-62-991-012)
(a)
the nut (14), the locking plate (15), the nut (4), the washer (5), the bolt (13) and the eccentric bush (12).
(b)
the links (6) and (8) and the bolt (16). NOTE : The bolts (1) and (17) and their related nuts and washers
____ were removed when the Slat No. 4 was removed.
(9) For the Slat track 10, remove:
(Ref. Fig. 606/TASK 27-84-62-991-013)
(a)
the nuts (17), the washers (16), the bolts (20) and the two links (18).
(b)
the nut (9), the locking plate (10), the nut (15), the washer (14), the bolt (4) and the eccentric bush (5).
(c)
the links (13) and (21) and the bolt (11). NOTE : The bolts (3) and their related nuts and washers were
____ removed when the Slat No. 4 was removed.
(10) For the Slat track 11, remove:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵8(92)
