A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵8(109)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 9.497 | 9.512 | | | 9.488 | | | | OD 30 |(0.3738) |(0.3744) | | |(0.3735) | | | | | | | 0.000 | 0.028 | | | 0.046 | | | | | (0.0000)| (0.0011)| | |(0.0018)| | C | 9.512 | 9.525 | | | | 9.534 | | | ID 7 |(0.3744) |(0.3750) | | | |(0.3753) | | -------------------------------------------------------------------------------
1EFF : ALL 1 27-84-62Page 663 1 1 Feb 01/01R 1 1 1CES 1

 Subtask 27-84-62-220-121
 BY. Dimensional Check of Slat 5, Track 12
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 11.079 | 11.097 | | | 11.062 | | | | OD 29 |(0.4361) |(0.4368) | | |(0.4355) | | | | | | | -0.001 | 0.035 | | | 0.069 | | | | |-(0.0000*| (0.0013*| | |(0.0027*| | C | 11.096 | 11.114 | | | | 11.131 | | | ID 12 |(0.4368) |(0.4375) | | | |(0.4382) | | ********** DIFFERENCE IN IN. MARKED BY A STAR IS TRUNCATED **********
 Subtask 27-84-62-220-122
 BZ. Dimensional Check of Slat 5, Track 12
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 1EFF : ALL 1 27-84-62Page 664 1 1 Feb 01/01R 1 1 1CES 1

 -------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 11.079 | 11.097 | | | 11.064 | | | | OD 29 |(0.4361) |(0.4368) | | |(0.4355) | | | | | | | 0.003 | 0.041 | | | 0.071 | | | | | (0.0001)| (0.0016)| | |(0.0027)| | C | 11.100 | 11.120 | | | | 11.135 | | | ID 15 |(0.4370) |(0.4377) | | | |(0.4383) | | -------------------------------------------------------------------------------
Subtask 27-84-62-220-123
 CA. Dimensional Check of Slat 5, Track 12
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 9.497 | 9.512 | | | 9.472 | | | | OD 25 |(0.3738) |(0.3744) | | |(0.3729) | | | | | | | 0.023 | 0.053 | | | 0.103 | | | | | (0.0009)| (0.0020)| | |(0.0040)| | C | 9.535 | 9.550 | | | | 9.575 | | | ID 18 |(0.3753) |(0.3759) | | | |(0.3769) | | -------------------------------------------------------------------------------
1EFF : ALL 1 27-84-62Page 665 1 1 Feb 01/01R 1 1 1CES 1

 Subtask 27-84-62-220-124
 CB. Dimensional Check of Slat 5, Track 12
 (1) Fits and clearance dimensions
 NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
 -------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 12.666 | 12.684 | | | 12.653 | | | | OD 22 |(0.4986) |(0.4993) | | |(0.4981) | | | | | | | 0.003 | 0.034 | | | 0.060 | | | | | (0.0001)| (0.0013)| | |(0.0023)| | C | 12.687 | 12.700 | | | | 12.713 | | | ID 19 |(0.4994) |(0.5000) | | | |(0.5005) | | -------------------------------------------------------------------------------
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵8(109)