B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power 27-50-00-000-003 Removal of the Lock-Torque Shaft - Flaps and Slats (98D27504030001) 27-50-00-400-003 Installation of the Lock-Torque Shaft - Flaps and
Slats (98D27504030001) 27-80-00-000-001 Removal of the Hoisting Sling 27-80-00-400-001 Installation of the Hoisting Sling 27-80-00-866-005 Retracting the Slats on the Ground 27-84-45-000-004 Removal of the Torque Shaft 6010CM(6060CM) 27-84-69-000-001 Removal of the Closing Plates for the Slat Tracks 1
thru 12 31-32-00-860-006 Procedure to Get Access to the SYSTEM REPORT/TEST F/CTL Page
57-41-37-000-006 Removal of the Access Panels 522FB(622FB),
522JB(622JB), 522KB(622KB), 522LB(622LB),
522NB(622NB), 522QB(622QB), 522SB(622SB),
522UB(622UB)
**ON A/C 001-049, 051-061, 101-105, 201-203,
27-84-64-991-002 Fig. 401
R **ON A/C 062-099, 106-149, 151-199, 204-299, 301-399, 401-499,
27-84-64-991-002-A Fig. 401A
**ON A/C ALL
27-84-64-991-003 Fig. 402
27-84-64-991-001 Fig. 403
3. Job Set-up__________
R
Subtask 27-84-64-941-051
A. Safety Precautions
(1) Put the safety barriers in position.
R (2) Fully retract the slats (Ref. TASK 27-80-00-866-005).
R (3) Install the TOOL-ZERO LOCKING, FLAP SLAT CTL LEVER (98D27803500001)
R on the flap/slat control lever on panel 114VU.
R (4) Put a warning notice in position to tell persons not to operate the
slat controls.
Subtask 27-84-64-860-053
R B. Aircraft Maintenance Configuration
R (1) Energize the ground service network
R (Ref. TASK 24-42-00-861-001).
R (2) On the MCDU:
R (a) Get access to the SYSTEM REPORT/TEST F/CTL page (Ref. TASK 31-32-
R 00-860-006).
R -------------------------------------------------------------------------------
R ACTION RESULT
R -------------------------------------------------------------------------------
R 1. On MCDU: On the MCDU:
R - push the line key for <SFCC1 - the MCDU shows the SFCC1 menu page 1.
R
R 2. Push the NEXT PAGE button - the MCDU shows the SFCC1 menu page 2.
R
R 3. Push the line key (2L) SYSTEM - the MCDU shows the slat SYSTEM DATA
R DATA SLT> submenu.
R
R -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------4. Push the line key (1L) <PPU - the MCDU shows the PPU DATA page(s).
R R R R 5. Write down the APPU and the FPPU angles (deg) shown on the display or push (in) the line key PRINT > to get a print out of the screen.
R R (3) De-energize the ground service network (Ref. TASK 24-42-00-862-001).
R R (4) Remove the safety collar from the circuit breakers 9CV and 11CV.
Subtask 27-84-64-865-050
C. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/SLT/CTL AND MONG/SYS1 5CV B06 121VU FLIGHT CONTROLS/WTB/SLT/SYS2 11CV P19 121VU FLIGHT CONTROLS/SLT/CTL/SYS2 7CV R21 122VU FLIGHT CONTROLS/WTB/SLT/SYS1 9CV S06
Subtask 27-84-64-010-051
D. Get Access
(1) Put the adjustable access platform in position below the zone 510(610).
(2) Remove the applicable access panel (Ref. TASK 57-41-37-000-006): - for the left wing, remove 522NB - for the right wing, remove 622NB.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵8(125)
