-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 25.959 | 25.980 | | | 25.932 | | | | OD 26 |(1.0220) |(1.0228) | | |(1.0209) | | | | | | | 0.020 | 0.062 | | | 0.116 | | | | | (0.0007)| (0.0024)| | |(0.0045)| | C | 26.000 | 26.021 | | | | 26.048 | | | ID 23 |(1.0236) |(1.0244) | | | |(1.0255) | | -------------------------------------------------------------------------------
Subtask 27-84-61-220-063
M. Dimensional Check of the Slat-to-Track Attachment Fittings, Track 1 thru 4
(1) Fits and clearance dimensions
NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | C | 17.966 | 17.984 | | | 17.943 | | | | OD 28 |(0.7073) |(0.7080) | | |(0.7064) | | | | | | | 0.016 | 0.052 | | | 0.098 | | | | | (0.0006)| (0.0020)| | |(0.0038)| | C | 18.000 | 18.018 | | | | 18.041 | | | ID 24 |(0.7086) |(0.7093) | | | |(0.7102) | | -------------------------------------------------------------------------------
1EFF : ALL 1 27-84-61Page 614 1 1 Feb 01/01R 1 1 1CES 1
Subtask 27-84-61-220-064
N. Dimensional Check of the Slat-to-Track Attachment Fittings, Track 1 thru 4
(1) Fits and clearance dimensions
NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 19.009 | 19.030 | | | 18.977 | | | | OD 1 |(0.7483) |(0.7492) | | |(0.7471) | | | | | | | 0.027 | 0.069 | | | 0.133 | | | | | (0.0010)| (0.0027)| | |(0.0052)| | B | 19.057 | 19.078 | | | | 19.110 | | | ID 2 |(0.7502) |(0.7511) | | | |(0.7523) | | -------------------------------------------------------------------------------
Subtask 27-84-61-220-065
P. Dimensional Check of the Slat-to-Track Attachment Fittings, Track 1 thru 4
(1) Fits and clearance dimensions
NOTE : The limits on the chrome-plated surfaces only apply when there
____ is a layer of chrome on the bearing surfaces.
1EFF : ALL 1 27-84-61Page 615 1 1 Feb 01/01R 1 1 1CES 1
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 19.009 | 19.030 | | | 18.993 | | | | OD 1 |(0.7483) |(0.7492) | | |(0.7477) | | | | | | | 0.007 | 0.041 | | | 0.073 | | | | | (0.0002)| (0.0016)| | |(0.0028)| | B | 19.037 | 19.050 | | | | 19.066 | | | ID 3 |(0.7494) |(0.7500) | | | |(0.7506) | | -------------------------------------------------------------------------------
Subtask 27-84-61-220-066
Q. Dimensional Check of the Slat-to-Track Attachment Fittings, Track 1 thru 4
(1) Fits and clearance dimensions
NOTE : The limits on the chrome-plated surfaces only apply when there
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵8(74)
