(1) Complete an inspection of these dimensions.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 12.683 | 12.694 | | | 12.658 | | | | OD 3 |(0.4993) |(0.4997) | | |(0.4983) | | | | | | | 0.006 | 0.044 | | | 0.094 | | | | | (0.0002)| (0.0017)| | |(0.0037)| | B | 12.700 | 12.727 | | | | 12.752 | | | ID 2 |(0.5000) |(0.5010) | | | |(0.5020) | | -------------------------------------------------------------------------------
1EFF : ALL 1 27-64-41Page 608 1 1 May 01/04R 1 1 1CES 1
Subtask 27-64-41-220-053
C. Dimensions of the Spoiler 1
NOTE : Limits on chrome plated items only apply when there is a layer of
____
chrome remaining on the bearing surfaces.
(1) Complete an inspection of these dimensions.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 12.683 | 12.694 | | | 12.658 | | | | OD 3 |(0.4993) |(0.4997) | | |(0.4983) | | | | | | | 0.006 | 0.044 | | | 0.094 | | | | | (0.0002)| (0.0017)| | |(0.0037)| | B | 12.700 | 12.727 | | | | 12.752 | | | ID 4 |(0.5000) |(0.5010) | | | |(0.5020) | | -------------------------------------------------------------------------------
Subtask 27-64-41-220-054
D. Dimensions of the Spoiler 1
NOTE : Limits on chrome plated items only apply when there is a layer of
____
chrome remaining on the bearing surfaces.
(1) Complete an inspection of these dimensions.
1EFF : ALL 1 27-64-41Page 609 1 1 May 01/04R 1 1 1CES 1
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 19.030 | 19.043 | | | 19.000 | | | | OD 4 |(0.7492) |(0.7497) | | |(0.7480) | | | | | | | 0.007 | 0.053 | | | 0.113 | | | | | (0.0002)| (0.0020)| | |(0.0044)| | B | 19.050 | 19.083 | | | | 19.113 | | | ID 1 |(0.7500) |(0.7512) | | | |(0.7524) | | -------------------------------------------------------------------------------
Subtask 27-64-41-220-055
E. Dimensions of the Spoiler 1
NOTE : Limits on chrome plated items only apply when there is a layer of
____
chrome remaining on the bearing surfaces.
(1) Complete an inspection of these dimensions.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 12.683 | 12.694 | | | 12.658 | | | | OD 3 |(0.4993) |(0.4997) | | |(0.4983) | | | | | | | 0.006 | 0.044 | | | 0.094 | | | | | (0.0002)| (0.0017)| | |(0.0037)| | B | 12.700 | 12.727 | | | | 12.752 | | | ID 5 |(0.5000) |(0.5010) | | | |(0.5020) | | -------------------------------------------------------------------------------
1EFF : ALL 1 27-64-41Page 610 1 1 May 01/04R 1 1 1CES 1
Subtask 27-64-41-220-056
F. Dimensions of the Spoiler 1
NOTE : Limits on chrome plated items only apply when there is a layer of
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵6(131)
