(2)
Remove the warning notice(s).
(3)
Remove the ground support and maintenance equipment, the special and standard tools and all other items.
1EFF : ALL 1 27-64-41Page 436 1 1 Aug 01/04R 1 1 1CES 1
SPOILER 1 - INSPECTION/CHECK
____________________________ TASK 27-64-41-200-001 Inspection/Check of the Spoiler 1 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING EDGE:
_______
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.
-MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
1.
Reason for the Job
__________________
Because the free movement is more than that in TASK 27-64-00-200-001.
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers No specific warning notice
1EFF : ALL 1 27-64-41Page 601 1 1 Feb 01/03R 1 1 1CES 1
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
27-64-41-000-001 Removal of the Spoiler 1
27-64-41-400-001 Installation of the Spoiler 1
**ON A/C 001-003, 051-052,
27-64-41-991-003 Fig. 601 R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 401-499,
27-64-41-991-003-A Fig. 601A
**ON A/C 301-399,
27-64-41-991-003-B Fig. 601B
**ON A/C ALL
3. Job Set-up
__________
Subtask 27-64-41-941-054
A. Safety Precautions
(1)
Put the safety barriers in position.
(2)
Put a warning notice in position to tell persons not to operate the flight controls.
Subtask 27-64-41-010-051
B. Get Access
(1) Remove the spoiler 1 (Ref. TASK 27-64-41-000-001).
4. Procedure
_________
**ON A/C 001-003, 051-052,
(Ref. Fig. 601/TASK 27-64-41-991-003) R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 401-499,
(Ref. Fig. 601A/TASK 27-64-41-991-003-A)
**ON A/C 301-399,
(Ref. Fig. 601B/TASK 27-64-41-991-003-B)
**ON A/C ALL
CAUTION : BE CAREFUL WHEN YOU DO MAINTENANCE TASKS ON THE WING TRAILING
_______
EDGE:
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE RACEWAYS.
-
DO NOT CAUSE DAMAGE TO THE ELECTRICAL CABLE INSTALLATIONS.
-MAKE SURE THAT THE ELECTRICAL CABLES ARE INSTALLED CORRECTLY. INCORRECT INSTALLATION CAN CAUSE DAMAGE.
Subtask 27-64-41-220-051
A. Dimensions of the Spoiler 1 NOTE : Limits on chrome plated items only apply when there is a layer of
____
chrome remaining on the bearing surfaces.
(1) Complete an inspection of these dimensions.
Spoiler 1
Figure 601/TASK 27-64-41-991-003- 12 (SHEET 1)
R 1EFF : 001-003, 051-052, 1 27-64-41Page 604 1 1 May 01/05 1 1 1CES 1
Spoiler 1
Figure 601/TASK 27-64-41-991-003- 22 (SHEET 2)
R 1EFF : 001-003, 051-052, 1 27-64-41Page 605 1 1 May 01/05 1 1 1CES 1
Spoiler 1 Figure 601A/TASK 27-64-41-991-003-A
R 1EFF : 004-049, 053-099, 101-149, 151-199, 1 27-64-41Page 606 1201-299, 401-499, 1Aug 01/05 1 1 1CES 1
R Spoiler 1
R Figure 601B/TASK 27-64-41-991-003-B
R 1EFF : 301-399, 1 27-64-41 Page 607
1 1 May 01/04
1 1
1CES 1
-------------------------------------------------------------------------------
| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | B | 19.030 | 19.043 | | | 19.000 | | | | OD 2 |(0.7492) |(0.7497) | | |(0.7480) | | | | | | | 0.007 | 0.053 | | | 0.113 | | | | | (0.0002)| (0.0020)| | |(0.0044)| | B | 19.050 | 19.083 | | | | 19.113 | | | ID 1 |(0.7500) |(0.7512) | | | |(0.7524) | | -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵6(130)
