• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-21 14:21来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

R  (Ref. TASK 29-10-00-864-003). 
R  (12) Extend the related spoiler by hand (Ref. TASK 27-60-00-866-002). 
R  (13) TORQUE the nut (3) to between 8 and 9 m.daN (58.99 and 66.37 lbf.ft) 
R  and safety with Lockwire corrosion resistant steel dia 0.8 mm (0.03 
R  in.). 
R  (14) Retract the related spoiler by hand (Ref. TASK 27-60-00-866-002). 

R 1EFF : 301-399, 1 27-64-00Page 530 1 1 May 01/04 1 1 1CES 1


R  (15) Pressurize the hydraulic system that relates to the spoiler you 
R  adjust. 
R  (a) For the spoiler 1 or 5, pressurize the Green hydraulic system 
R  (Ref. TASK 29-23-00-863-001). 
R  (b) For the spoiler 2 or 4, pressurize the Yellow hydraulic system 
R  (Ref. TASK 29-24-00-863-001). 
R  (c) For the spoiler 3, pressurize the Blue hydraulic system 
R  (Ref. TASK 29-10-00-863-003). 
R  (16) Make sure that the clearance X is correct. 
R  (17) Remove the PIN-SIDE STICK LOCKING (98D27903500000) from each 
R  sidestick controller. 
R  (18) Remove the LOCKING TOOL - FLAP/SLAT CONTROL LEVER (98D27803000000) 
R  from the flap and slat control lever. 
R  Subtask 27-64-00-865-061 
R  C. Remove the safety clip(s) and the tag(s) and close this(these) circuit 
R  breaker(s): 
R  21CE1, 21CE2, 21CE3, 22CE 
R  Subtask 27-64-00-710-056 
R  D. Do the operational test of the spoiler hydraulic actuation (Ref. TASK 27-
R  64-00-710-001). 
R  5. Close-up________ 
R  Subtask 27-64-00-860-063 
R  A. Put the aircraft back to its initial configuration. 
R  (1) Depressurize the hydraulic system that relates to the spoiler you 
R  adjust: 
R  (a) For the spoiler 1 or 5, depressurize the Green hydraulic system 
R  (Ref. TASK 29-23-00-864-001). 
R  (b) For the spoiler 2 or 4, depressurize the Yellow hydraulic system 
R  (Ref. TASK 29-24-00-864-001). 

R 1EFF : 301-399, 1 27-64-00Page 531 1 1 May 01/04 1 1 1CES 1


R  (c) For the spoiler 3, depressurize the Blue hydraulic system 
R  (Ref. TASK 29-10-00-864-003). 
R  (2) Remove the warning notice(s). 
R  (3) Make sure that the work area is clean and clear of tool(s) and other 
R  items. 
R  Subtask 27-64-00-410-057 
R  B. Close Access 
R  (1) Install the protective cover on the battery power center 105VU. 
R  (2) Tighten the two screws. 
R  (3) Close the access door 822. 
R  (4) Close these access doors : 
R  (a) 573BB for the left spoiler 1. 
R  (b) 575BB for the left spoiler 2. 
R  (c) 575DB for the left spoiler 3. 
R  (d) 575EB for the left spoiler 4. 
R  (e) 575GB for the left spoiler 5. 
R  (f) 673BB for the right spoiler 1. 
R  (g) 675BB for the right spoiler 2. 
R  (h) 675DB for the right spoiler 3. 
R  (i) 675EB for the right spoiler 4. 
R  (j) 675GB for the right spoiler 5. 
R  (5) Remove the access platform(s). 
R  Subtask 27-64-00-862-059 
R  C. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-
R  002). 

R 1EFF : 301-399, 1 27-64-00Page 532 1 1 May 01/04 1 1 1CES 1

 

R **ON A/C 151-199, 401-499,

 TASK 27-64-00-820-001-B
 Adjustment of the Spoilers
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS


 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______ CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
 WARNING : MAKE SURE THAT THE CONTROLS AGREE WITH THE POSITION OF THE ITEMS THEY
_______ OPERATE BEFORE YOU PRESSURIZE A HYDRAULIC SYSTEM.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job__________________
 Self Explanatory
 2. Job Set-up Information______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵6(114)