• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-21 13:53来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 Close the access doors 811, 825, 826, 312AR.

 (9)
 Remove the access platform(s).


R 1EFF : ALL 1 27-41-00Page 608 1 1 May 01/05 1 1 1CES 1R **ON A/C 151-199, 401-499,

 

 Subtask 27-41-00-410-050-C
 A. Close Access
 (1)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (2)
 In the zones 211 and 221, install the floor panels 211GF, 211KF, 221EF 221LF (Ref. TASK 53-12-11-400-001) (Ref. TASK 53-12-12-400-001).

 (3)
 In the zones 231 and 241, install the floor panels 231CF, 231WF, 241BF, 241FF, 241KF (Ref. TASK 53-22-12-400-001) (Ref. TASK 53-32-12-400-002).

 (4)
 In the zone 131, install the ceiling panels 131KC, 131MC, 131NC (Ref. TASK 25-54-12-400-002).

 (5)
 In the zone 131, install the partition panel 131PW (Ref. TASK 25-54-12-400-001).

 (6)
 In the zones 151 and 161, install the ceiling panels 151EC, 151FC, 151GC, 161AC, 161BC. (Ref. TASK 25-55-11-400-002) (Ref. TASK 25-55-12-400-002).

 (7)
 In the zone 161, install the partition panels 161DW, 162DW (Ref. TASK 25-55-12-400-001).

 (8)
 Close the access doors 811, 825, 826, 312AR.

 (9)
 Remove the access platform(s).


R 1EFF : 151-199, 401-499, 1 27-41-00Page 609 1 1 Aug 01/05 1 1 1CES 1


R  **ON A/C 001-049, 054-099, 101-149, 201-299, 301-399, 
R  Post SB 53-1143 For A/C 001-003, 
R  Subtask 27-41-00-410-050-B 
R  A. Close Access 
R  (1) Make sure that the work area is clean and clear of tool(s) and other 
R  items. 
R  (2) In the zones 211 and 221, install the floor panels 211GF, 211KF, 
R  221EF 221LF (Ref. TASK 53-12-11-400-001) (Ref. TASK 53-12-12-400-
R  001). 
R  (3) In the zones 231 and 241, install the floor panels 231CF, 231WF, 
R  241BF, 241FF, 241KF (Ref. TASK 53-22-12-400-001) (Ref. TASK 53-32-12-
R  400-002). 
R  (4) In the zone 131, install the ceiling panels 131AC, 131BC, 131CC 
R  (Ref. TASK 25-54-12-400-002). 
R  (5) In the zone 131, install the partition panel 131PW (Ref. TASK 25-54-
R  12-400-001). 
R  (6) In the zones 151 and 161, install the ceiling panels 151AC, 151BC, 
R  151CC, 151DC, 161AC, 161BC. (Ref. TASK 25-55-11-400-002) (Ref. TASK 
R  25-55-12-400-002). 
R  (7) In the zone 161, install the partition panels 161DW, 162DW (Ref. TASK 
R  25-55-12-400-001). 
R  (8) Close the access doors 811, 825, 826, 312AR. 
R  (9) Remove the access platform(s). 

R 1EFF : 001-049, 054-099, 101-149, 201-299, 1 27-41-00Page 610 1301-399, 1May 01/05 1 1 1CES 1 **ON A/C ALL


 TASK 27-41-00-210-002
 Visual Inspection of the Pitch-Trim Control Wheel Indicators
 WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
 -
THE FLIGHT CONTROLS

 -
THE FLIGHT CONTROL SURFACES

 -
THE LANDING GEAR AND THE RELATED DOORS


 -COMPONENTS THAT MOVE.
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job
__________________
 Do a check for cracks on the pitch-trim control wheel indicators.
 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
 from the External Power 27-41-41-000-001 Removal of the Control Mechanism-Pitch Trim 27-41-41-400-001 Installation of the Control Mechanism-Pitch Trim 29-10-00-864-001 Depressurize the Green Hydraulic System 29-23-00-863-001 Pressurize the Green Hydraulic System from the Yellow
 Hydraulic System through the PTU with the Electric
 Pump 29-24-00-864-001 Depressurize the Yellow Hydraulic System 31-60-00-860-001 EIS Start Procedure 31-60-00-860-002 EIS Stop Procedure
 1EFF : ALL 1 27-41-00Page 611 1 1 May 01/05R 1 1 1CES 1


 3. Job Set-up__________
 Subtask 27-41-00-865-054
 A. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU FLIGHT CONTROLS/ELAC1/NORM/SPLY 15CE1 B11 49VU FLIGHT CONTROLS/THS/ACTR/MOT2 19CE2 B09 49VU FLIGHT CONTROLS/SEC1/NORM/SPLY 21CE1 B08 49VU LIGHTING/ICE AND STBY/COMP/LIGHT 1LF H04 105VU FLIGHT CONTROLS/ELAC2/STBY SPLY 16CE2 A02 105VU FLT CTL/ELAC1/STBY SPLY 16CE1 A01 121VU FLIGHT CONTROLS/SEC3/SPLY 21CE3 Q19 121VU FLIGHT CONTROLS/SEC2/SPLY 21CE2 Q18 121VU FLIGHT CONTROLS/THS ACTR/MOT3 19CE3 Q17 121VU FLIGHT CONTROLS/THS ACTR/MOT1 19CE1 Q16 121VU FLIGHT CONTROLS/ELAC2/NORM/SPLY 15CE2 R20 122VU LIGHTING/INSTL LT/GLARE/SHLD 5LF Y05 122VU LIGHTING/INSTL LT/MAIN INST/PNL AND/PED 4LF Y04 122VU LIGHTING/INSTL LT/OVHD/PNL 3LF Y03
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵3(96)