Subtask 27-34-51-220-052-A
C. Fits and Clearances
(1) Complete an inspection of these dimensions.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | E | 15.846 | 15.862 | | | 15.816 | | | | OD 3 |(0.6238) |(0.6244) | | |(0.6226) | | | | | | | 0.013 | 0.047 | | | 0.107 | | | | | (0.0005)| (0.0018)| | |(0.0042)| | E | 15.875 | 15.893 | | | | 15.923 | | | ID 4 |(0.6250) |(0.6257) | | | |(0.6268) | | -------------------------------------------------------------------------------
NOTE : No wear is permitted between the bolt (3) and the bush (4).____
R **ON A/C 051-051,
R Subtask 27-34-51-220-051
R B. Fits and Clearances
R (1) Complete an inspection of these dimensions,
R -------------------------------------------------------------------------------
R | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS |
R | DETAIL |---------------------------------------|----------------------------|
R | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. |
R | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. |
R | NO. |-------------------|-------------------|---------|---------| CLEAR. |
R | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)|
R |--------|---------|---------|---------|---------|---------|---------|--------|
R | E | 15.846 | 15.862 | | | 15.831 | | |
R | OD 3 |(0.6238) |(0.6244) | | |(0.6232) | | |
R | | | | 0.000 | 0.029 | | | 0.059 |
R | | | | (0.0000)| (0.0011)| | |(0.0023)|
R | E | 15.862 | 15.875 | | | | 15.890 | |
R | ID 1 |(0.6244) |(0.6250) | | | |(0.6255) | |
R -------------------------------------------------------------------------------
R NOTE : No wear is permitted between the bush (1) and the bolt (3).____
R Subtask 27-34-51-220-052
R C. Fits and Clearances
R (1) Complete an inspection of these dimensions.
R -------------------------------------------------------------------------------
R | FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS |
R | DETAIL |---------------------------------------|----------------------------|
R | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. |
R | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. |
R | NO. |-------------------|-------------------|---------|---------| CLEAR. |
R | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)|
R |--------|---------|---------|---------|---------|---------|---------|--------|
R | E | 15.846 | 15.862 | | | 15.831 | | |
R | OD 3 |(0.6238) |(0.6244) | | |(0.6232) | | |
R | | | | 0.000 | 0.029 | | | 0.059 |
R | | | | (0.0000)| (0.0011)| | |(0.0023)|
R | E | 15.862 | 15.875 | | | | 15.890 | |
R | ID 4 |(0.6244) |(0.6250) | | | |(0.6255) | |
R -------------------------------------------------------------------------------
R NOTE : No wear is permitted between the bolt (3) and the bush (4).____
R 1EFF : 051-051, 1 27-34-51Page 605 1 1 May 01/05 1 1 1CES 1R **ON A/C ALL
Subtask 27-34-51-220-054
D. Fits and Clearances
(1) Complete an inspection of these dimensions.
-------------------------------------------------------------------------------| FIG. | ORIGINAL MANUFACTURING LIMITS | IN-SERVICE WEAR LIMITS | | DETAIL |---------------------------------------|----------------------------| | AND | DIMENSION | ASSEMBLY CLEARANCE| DIMENSION LIMITS | MAX. | | ITEM | MM (IN.) | MM (IN.) | MM (IN.) | ALLOW. | | NO. |-------------------|-------------------|---------|---------| CLEAR. | | | MIN. | MAX. | MIN. | MAX. | MIN. | MAX. |MM (IN.)| |--------|---------|---------|---------|---------|---------|---------|--------| | F | 15.850 | 15.861 | | | 15.821 | | | | OD 5 |(0.6240) |(0.6244) | | |(0.6228) | | | | | | | 0.014 | 0.043 | | | 0.101 | | | | | (0.0005)| (0.0016)| | |(0.0039)| | F | 15.875 | 15.893 | | | | 15.922 | | | ID 6 |(0.6250) |(0.6257) | | | |(0.6268) | | -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM FLIGHT CONTROLS 飞行操纵3(77)
