NOTE 1 : If a 100-hr. inspection has been carried out during the last 3 months, do not perform this operation unless this annual inspection replaces a 100-hr. inspection. For US registered aircraft, perform all operations.
ADAA
Validity : S / N 1 - 9999 05 20 06 (EA) Page 225
JUN 01
ATA ANNUAL INSPECTION (AI)
STABILIZER INSPECTION (AREA 300) AREA OTHER INSPECTION
PERFORMED
BY
55-00 STABILIZER INSPECTION (AREA 300) 300
55-00 1) Perform an overall visual inspection of area 300. 300
11-00 2) Check installation and legibility of exterior placards and markings - refer to 11-20-00 1. 300 NOTE 1
55-20 3) Visually inspect the elevator hinge bearings. 300 1000 hrs or
S / N 1 - 1864, 1867 - 1869 2 years
Refer to the latest issue of SB 10-101-55.
55-20 4) Check the balancing weight and the boom for security and evidence of corrosion. 300 NOTE 1
55-40 5) Visually inspect the rudder hinges and check for loose rivets, cracks and evidence of corrosion. 300
55-40 6) Check the balancing weight for attachment, and check for evidence of corrosion ; in case of doubt, remove the vertical stabilizer tip - refer to 55-40-00 201. 300 NOTE 1
55-00 7) Visually inspect the stabilizer and trim tab hinges. 300
Perform an operational test.
55-00 8) Visually inspect (do not remove) the visible portions of both elevator and vertical stabilizer, check for loose rivets, cracks and evidence of corrosion. 300
30-10 9) Visually inspect the porous leading edges (if installed) on the stabilizers. 300 NOTE 1
27-20 10) Visually inspect the adjustable end of the rudder trim tab control (on control surface side). 300
27-30 11) Visually inspect the adjustable end of the elevator and the trim tab (on control surface side). 300
24-00 12) Visually inspect all cable connections in the vertical stabilizer. 300
Replace cables if damaged. Inspect cables for routing, clamp security, lugs and cleanliness.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飞机维护手册 05 时间限制维护检查 2(70)
