TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飞机维护手册 05 时间限制维护检查 2(55)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 34-11-00 201.   
34-10 56) Perform a tightness test on air data systems and check the associated instruments - refer to 34-11-00 201. 200 300 hrs or
3 years 
34-10 57) Visually inspect the pitot tube and the dynamic pressure system in the L.H. wing. Check the hoses and their attach fittings for condition. 500  
34-10 58) Visually inspect the pitot tube (if installed) and the
dynamic pressure system in the R.H. wing. Check hoses and attach fittings for condition. 600  
34-00 59) Check VFR equipment (if installed). 200  
 NOTE : Must be performed by an approved radio center in compliance with the regulation in force in the country of use.   
 (Examples :   
 - FAR Part 91.411 and 91.413 : 24 months, - GSAC Instruction bulletin P-41-15, Ed. 1
dated September 2000 :   
 . operational test plus flight check every   
 4 years maximum,
. check on test bench every 6 years for equipment with French type approval prior to January 1, 1980 - refer to GSAC   
 Instruction bulletin P-04-30.).   

NOTE 1 : If a 100-hr. inspection has been carried out during the last 3 months, do not perform this operation unless this annual inspection replaces a 100-hr. inspection. For US registered aircraft, perform all operations.
ADAA
Validity : S / N 1 - 9999 05-20 06 Page 208
(EA) JUN 01
 

ATA ANNUAL INSPECTION (AI)
COCKPIT AND FUSELAGE INSPECTION (AREA 200) AREA OTHER INSPECTION
PERFORMED
BY
34-00 60) Check IFR equipment (if installed). 200  
 NOTE : Must be performed by an approved radio center in compliance with the regulation in force in the country of use.   
 (Examples :   
 - FAR Part 91.411 and 91.413 : 24 months, - GSAC Instruction bulletin P-41-15, Ed. 1 dated September 2000 :   
 . operational test plus flight check every   
 18 months maximum,
. check on test bench every 3 years for equipment with French type approval prior to January 1, 1980 - refer to GSAC   
 Instruction bulletin P-04-30.).   
34-40 61) Check the altimeter and/or the encoding altimeter or the altitude encoder. 200  
 NOTE : Must be performed by an approved radio center in compliance with the regulation in force in the country of use.   
 Example : FAR Part 91.411 and 91.413 =   
 24 months.   
34-50 62) Check the transponder(s). 200  
 NOTE : Must be performed by an approved radio center in compliance with the regulation in force in the country of use.   
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飞机维护手册 05 时间限制维护检查 2(55)