AIAA
Validity : S / N 1 - 9999 05-20-04 (JA) Page 216
JUN 01
ATA "4A" INSPECTION - 100 HOURS
STABILIZER INSPECTION (AREA 300) AREA OTHER INSPECTION
PERFORMED
BY
55-00 STABILIZER INSPECTION (AREA 300) 300
55-00 1) Perform an overall visual inspection of area 300. 300
11-00 2) Check installation and legibility of exterior placards and markings - refer to 11-20-00 1. 300
55-20 3) Visually inspect the elevator hinge bearings. 300 1000 hrs or
S / N 1 - 1864, 1867 - 1869 2 years
Refer to the latest issue of SB 10-101-55.
55-20 4) Check the balancing weight and the boom for security and evidence of corrosion. 300
55-40 5) Check the balancing weight for attachment, and check for evidence of corrosion ; in case of doubt, remove the vertical stabilizer tip - refer to 55-40-00 201. 300
55-00 6) Visually inspect the stabilizer and trim tab hinges. 300
Perform an operational test.
30-10 7) Visually inspect the porous leading edges (if installed) on the stabilizers. 300
20-00 8) Reinforce the anticorrosion protection - refer to 300
20-00-04 201 and lubricate - refer to 12-21-03 201.
AIM
Validity : S / N 1 - 9999 05-20-04 (JA) Page 217
JUN 01
ATA "4A" INSPECTION - 100 HOURS
FINAL STEPS AREA OTHER
INSPECTION PERFORMED
BY
FINAL STEPS 000
52-40 1) Install baggage compartment bottom door 242. 200
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飞机维护手册 05 时间限制维护检查 2(17)