曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
LANDING GEAR INSPECTION (AREA 700) AREA OTHER
INSPECTION PERFORMED
BY
32-00 LANDING GEAR INSPECTION (AREA 700) 700
32-00 1) Perform an overall visual inspection of area 700. 700
11-00 2) Check installation and legibility of exterior placards and markings - refer to 11-20-00 1. 700
32-40 3) Visually inspect (do not remove) the wheels for wear, distortion or cracks. 700
32-40 4) Visually inspect the tires ; look for evidence of uneven wear, cuts, distortion and displacement of the tire on the wheel. 700
32-40 5) Visually inspect the braking systems for condition,
attachment, brake plate and disk wear. 700
32-20 6) Visually inspect the nose landing gear leg, the sliding body and the fork for cracks and distortion ; thoroughly inspect the half-scissors and hinged strut attachment bosses. 700
In case of doubt, remove, inspect and reinstall the
half-scissors - refer to 32-20-03 201.
32-20 7) Visually inspect the nose landing gear mount for cracks. 700
32-20 8) Check that the nose landing gear mount is correctly attached to the firewall. Check the red painted marks on the bolts for alignment. 700
32-20 9) Visually inspect the nose landing gear wheel-centering device. 700
32-30 10) Replace the landing gear actuating cylinders. 700 30000
cycles
32-30 Landing gear struts without grease nipples 700 500 hrs or
11) Remove the front part of the nose landing gear strut and remove the main landing gear struts. Thoroughly inspect the struts for excessive play, cracks, distortion and
evidence of corrosion. 1 year
Lubricate the inner flanks of the yokes, the axles and the ball joints - refer to the latest issue of SOCATA SB 45.
Install the struts - refer to 32-30-04 201, 32-30-03 201.
32-30 All 700
12) Visually inspect the nose landing gear and main landing gear struts for excessive play, cracks, distortion and evidence of corrosion.
32-40 13) Check tire inflation pressures - refer to 12-14-01 301. 700
AIAA
Validity : S / N 1 - 9999 05-20-04 (JA) Page 208
JUN 01
ATA "4A" INSPECTION - 100 HOURS
LANDING GEAR INSPECTION (AREA 700) AREA OTHER
INSPECTION PERFORMED
BY
32-30 14) Change the landing gear hydraulic fluid and replace the emergency valve seals - refer to 12-13-03 301,
12-13-04 301, 32-35-02 201. 200 3 years
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飞机维护手册 05 时间限制维护检查 2(10)
