曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
71-20 6) Visually check that the engine mount is correctly attached to the firewall. Check the red painted marks on the bolts for alignment. 100
71-20 7) Check the engine attaching bolts for proper torque and check the vibration isolators for wear. In case of wear, replace all the vibration isolators - refer to 71-20-00 201. 100
21-40 8) Perform a detail examination of air regulation hose(s) and firewall-mounted box(es) for cracks. 100
21-55 9) Visually inspect the vapor cycle cooling compressor and the support (if installed) - refer to the latest issue of 100
KEITH MM/IPC No. 20-0101SM.
24-30 10) Perform an overhaul of the alternator. 100 Associated
with engine
overhaul
24-30 11) Visually inspect the alternator, attach fittings, noise filter and connections. 100
24-30 12) Check the condition and tension of the alternator belt - refer to 24-30-01 201. 100
Check the tension of a new belt after the first 25 operating hours.
Refer to the latest issue of LYCOMING Service
Instruction 1129, for belt tension adjustment.
21-55 13) Check the belt of the vapor cycle cooling compressor (if installed) for condition and tension - refer to 21-55-01 201. 100
Check the tension of a new belt after the first 25 operating hours.
AIM
Validity : S / N 1 - 9999 05-20 Page N 01
05 (JA) JUN u
ATA "80A" MAJOR INSPECTION
ENGINE COMPARTMENT INSPECTION (AREA 100) AREA OTHER
INSPECTION PERFORMED
BY
80-00 14) Perform an overhaul of the starter. 100 Associated
with engine
overhaul
80-00 15) Visually inspect the starter, the attach fittings and the connections. To adjust the clearance between the
toothed ring and the LYCOMING starter drive gear, refer to the latest issue of TEXTRON LYCOMING Service 100
Instruction No. 1447.
80-00 16) Visually inspect the starter relay (if battery at the front), check attach fittings, lugs and terminal covers. 100
24-00 17) Visually inspect the battery relay and the ground power unit relay (front battery option). Check attachments, lugs and terminal covers. 100
24-00 18) Check all cable connections to engine and accessories, engine mount, firewall. 100
Replace cables if damaged. Inspect cables for routing, clamp security, cleanliness, lugs and terminal covers.
28-20 S / N 1 - 7?0 100
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飞机维护手册 05 时间限制维护检查 2(40)
