曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
BY
32-20 14) Visually inspect the nose landing gear leg, the sliding body and the fork for cracks and distortion ; thoroughly inspect the half-scissors and hinged strut attachment bosses. 700
Remove, inspect and reinstall the half-scissors - refer to 32-20-03 201.
32-20 15) Visually inspect the nose landing gear axles, bushings and hinge bearings ; check for evidence of wear and excessive play. 700
32-20 16) Check the nose landing gear shock absorber for inflation and leaks - refer to 12-14-02 301. 700
32-20 17) Visually inspect the nose landing gear door, check the attach fittings and look for cracks and distortion. 700
32-20 18) Visually inspect the nose landing gear mount for cracks. 700 NOTE 1
32-20 19) Check that the nose landing gear mount is correctly attached to the firewall. Check the red painted marks on the bolts for alignment. 700 NOTE 1
32-20 20) Visually inspect the nose landing gear wheel-centering device. 700 NOTE 1
32-20 21) Visually inspect the nose landing gear interconnection system and check the levers for condition. 700
32-30 22) Replace the landing gear actuating cylinders. 700 30000
cycles
32-30 23) Visually inspect the 3 actuating cylinders and the attach fittings ; check for leaks and check the moving parts for evidence of wear or shock marks. 700
32-30 Landing gear struts without grease nipples 700 500 hrs or
24) Remove the front part of the nose landing gear strut and remove the main landing gear struts. Thoroughly inspect the struts for excessive play, cracks, distortion and
evidence of corrosion. 1 year
Lubricate the inner flanks of the yokes, the axles and the ball joints - refer to the latest issue of SOCATA SB 45.
Install the struts - refer to 32-30-04 201, 32-30-03 201.
32-30 All 700 NOTE 1
25) Visually inspect the nose landing gear and main landing gear struts for excessive play, cracks, distortion and evidence of corrosion.
NOTE 1 : If a 100-hr. inspection has been carried out during the last 3 months, do not perform this operation unless this annual inspection replaces a 100-hr. inspection. For US registered aircraft, perform all operations.
ADM
Validity : S / N 1 - 9999 05-20 06Page 213
(EA) JUN 01
ATA ANNUAL INSPECTION (Al)
LANDING GEAR INSPECTION (AREA 700) AREA OTHER
INSPECTION PERFORMED
BY
32-30 26) Visually inspect the nose landing gear extension
compensating cylinders (gas struts) and the attach fittings ; check for evidence of wear and corrosion. 700
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飞机维护手册 05 时间限制维护检查 2(59)
