TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飞机维护手册 05 时间限制维护检查 2(13)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

57-50 11) Visually inspect the R.H. flap attachment and hinge. 600  
20-00 12) Reinforce the anticorrosion protection - refer to 600  
 20-00-04 201 and lubricate - refer to 12-21-04 201.   
 

ATA "4A" INSPECTION - 100 HOURS
ENGINE COMPARTMENT INSPECTION (AREA 100) AREA OTHER
INSPECTION PERFORMED
BY
71-00 ENGINE COMPARTMENT INSPECTION (AREA 100) 100  
71-00 1) Perform an overall visual inspection of area 100. 100  
11-00 2) Check installation and legibility of exterior placards and markings - refer to 11-20-00 1. 100  
32-40 3) Visually inspect the brake hydraulic reservoir. Check fluid level - refer to 12-13-01 301. 100  
32-40 4) Change the brake hydraulic fluid - refer to 12-13-01 301, 12-13-02 301. 100 3 years 
71-20 5) Visually inspect the engine mount for distortion, cracks, evidence of corrosion and interference. Check the
protection - refer to 20-00-04 201 and 71-20-00 201. 100  
71-20 6) Visually check that the engine mount is correctly attached to the firewall. Check the red painted marks on the bolts for alignment. 100  
71-20 7) Check the engine attaching bolts for proper torque and check the vibration isolators for wear. In case of wear, replace all the vibration isolators - refer to 71-20-00 201. 100  
21-50 8) Visually inspect the vapor cycle cooling compressor and the support (if installed) - refer to the latest issue of 100  
 KEITH MM/IPC No. 20-0101 SM.   
24-30 9) Perform an overhaul of the alternator. 100 Associated
with engine
overhaul 
24-30 10) Check the condition and tension of the alternator belt - refer to 24-30-01 201. 100  
 Check the tension of a new belt after the first 25 operating hours.   
 Refer to the latest issue of LYCOMING Service   
 Instruction 1129, for belt tension adjustment.   
21-50 11) Check the belt of the vapor cycle cooling compressor (if installed) for condition and tension - refer to 100  
 21-50-01 201.   
 Check the tension of a new belt after the first 25 operating hours.   
80-00 12) Perform an overhaul of the starter. 100 Associated
with engine
overhaul 
28-20 S / N 1 - 730 100  
 13) Clean or replace the fuel filter located close to the electric pump, check the support - refer to 28-20-02 201.   
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飞机维护手册 05 时间限制维护检查 2(13)