• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-10-13 19:40来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

80-00 39) Visually inspect the starter relay (battery at the rear), check the attach fittings, the lugs and the terminal covers. 200  
27-50 40) Visually inspect the flap relays, check attach fittings and lugs. 200  

AIAA
Validity : S / N 1 - 9999 05 20 05 (,A) Page 206
JUN 01
 

ATA "80A" MAJOR INSPECTION
COCKPIT AND FUSELAGE INSPECTION (AREA 200) AREA OTHER INSPECTION
PERFORMED
BY
27-50 41) Visually inspect the flap actuator and the supports for cracks. Using a mirror, inspect for cracks on frame C4 -refer to 27-50-01 201. 200 500 hrs 
32-30 42) Visually inspect the landing gear microswitches, electrical wiring and attach fittings - refer to 32-60-01 201,
32-30-07 201. 700  
32-30 43) Visually inspect the landing gear relays, electrical wiring and attach fittings. 200  
33-10 44) Visually inspect the control and indicating systems of the exterior lighting systems (anti-collision lights, navigation lights, lamps, strobe lights and identification lights), the attach fittings and the routing. 200  
33-40 45) Visually inspect the rear navigation light (if installed), the strobe light(s) and check the attach fittings. 200  
24-00 46) Visually inspect all cable connections under the floor, in the rear fuselage, under the instrument panel and on the front table. 200  
 Replace cables if damaged. Inspect cables for routing, clamp security, lugs and cleanliness.   
33-40 47) Visually inspect the flashing unit(s) (if installed), check connections and attach fittings for condition. 200  
27-30 48) Remove the servo-actuator of the electrical pitch trim control (if installed). Check setting and inspect for
corrosion - refer to 27-30-06 201, 22-11-00 201 and 200  
 22-12-00 201. Install the servo-actuator.   
22-10 49) Remove the servo-actuators of the autopilot (if installed), check setting and inspect for corrosion - refer to 200 1000 hrs 
 22-11-00 201 or 22-12-00 201 or 22-12-03 401 or   
 22-12-04 401 or 22-12-06 401. Install the
servo-actuators.   
22-10 50) Visually inspect the supports, levers, attachments of the autopilot (if installed) servo-actuators. Inspect
servo-actuator links to flight control linkages. 200 1000 hrs 
23-10 51) Visually inspect the antennas (if installed). 200  
23-10 52) Visually inspect the antenna cables (if installed), check for security, routing and interference. 200  
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飞机维护手册 05 时间限制维护检查 2(24)