ATA ANNUAL INSPECTION (AI)
LANDING GEAR INSPECTION (AREA 700) AREA OTHER
INSPECTION PERFORMED
BY
32-00 LANDING GEAR INSPECTION (AREA 700) 700
32-00 1) Perform an overall visual inspection of area 700. 700
11-00 2) Check installation and legibility of exterior placards and markings - refer to 11-20-00 1. 700 NOTE 1
24-00 3) Visually inspect all cable connections on the nose and main landing gears. 700
Replace cables if damaged. Inspect cables for routing, clamp security, lugs and cleanliness.
32-40 4) Remove and check main landing gear wheel caps 737 and 747 for condition - refer to 32-41-01 201. 700
32-40 5) Deflate the tires and remove the wheels - refer
to 12-14-01 301, 32-41-01 201, 32-41-02 201. 700
32-40 6) Thoroughly fluorescent dye penetrant inspect the wheels and the wheel axles for cracks, distortion and evidence of wear and corrosion. 700
32-40 7) Visually inspect the tires ; look for evidence of uneven wear, cuts, distortion and displacement of the tire on the wheel. 700
32-40 8) Inspect the brake hydraulic system unions for security and tigthness. 700
32-40 9) Visually inspect the braking systems for condition,
attachment, brake plate and disk wear. 700
32-10 10) Visually inspect the main landing gear bodies and rocker beams for cracks and distortion ; thoroughly inspect the shock absorber and hinged strut attachment bosses. 700
32-10 11) Visually inspect the main landing gear doors, the hinges and the control rod, inspect for security, excessive play, cracks and distortion. 700
32-10 12) Visually inspect the main landing gear axles and hinge bearings for cracks, distortion, evidence of wear and corrosion. Check for excessive play ; a friction mark on the stop stiffener shows that the play in the bearing ball joint is excessive. 700
32-10 13) Check the main landing gear shock absorbers for inflation and leaks - refer to 12-14-02 301. 700
NOTE 1 : If a 100-hr. inspection has been carried out during the last 3 months, do not perform this operation unless this annual inspection replaces a 100-hr. inspection. For US registered aircraft, perform all operations.
ADAA
Validity : S / N 1 - 9999 05-20-06Page 212
(EA) JUN 01
ATA ANNUAL INSPECTION (Al)
LANDING GEAR INSPECTION (AREA 700) AREA OTHER INSPECTION
PERFORMED
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：TB 20 MAINTENANCE MANUAL 05 TIME LIMITS MAINTENANCE CHECKS TB20飞机维护手册 05 时间限制维护检查 2(58)
