-
the servicing level of the shock absorber is done , less than one hour beforea flight
1EFF : ALL 1 32-21-13Page 435 1 1 May 01/05R 1 1 1CES 1
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s) No specific nitrogen source No specific pressure gage No specific rod No specific safety barrier No specific spatula No specific standard charging equipment No specific warning notice(s) D46795 1 FALSE JAWS M21930 1 FILLING ASSEMBLY M46200 1 FALSE JAWS M46201 1 PIN WRENCH 89901 1 SPATULA
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 02-001 USA MIL-H-5606 OIL, HYDRAULICPETROLEUM FLUID (Ref. 20-31-00)
Material No. 05-047 C Z-11.904 ANTI COR. COMPOUND(HIGH TEMP.SILICONE SEALANT) (Ref. 20-31-00)
Material No. 11-002 USA MIL-PRF-680 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT) (Ref. 20-31-00)
Material No. 11-004 USA MIL-T-81533 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM) (Ref. 20-31-00)
1EFF : ALL 1 32-21-13Page 436 1 1 May 01/05R 1 1 1CES 1
R
R
R
R
C. Expendable Parts -------------------------------------------------------------------------------
FIG.ITEM --------- |DESIGNATION ---------------------------------------- |IPC-CSN------------------------------
10 back-up rings 32-21-13 02 -200
10 back-up rings 32-21-13 02A-200
10 back-up rings 32-21-13 02B-200
10 back-up rings 32-21-13 02D-200
11 seal 32-21-13 02 -190
11 seal 32-21-13 02A-190
11 seal 32-21-13 02B-190
11 seal 32-21-13 02D-190
12 seal 32-21-13 02 -170A
12 seal 32-21-13 02A-170
12 seal 32-21-13 02B-170
12 seal 32-21-13 02D-170
13 scraper 32-21-13 02 -180
13 scraper 32-21-13 02A-180
13 scraper 32-21-13 02B-180
13 scraper 32-21-13 02D-180
D. Referenced Information
------------------REFERENCE -------------------------------DESIGNATION ------------------------------
-------------------------------------------------------------------------------
07-11-00-581-001 Lifting for Aircraft Maintenance Operations 07-11-00-586-001 Lowering of the Aircraft at Forward Jacking Point,
MLG Wheels on the Ground 32-21-13-000-001 Removal of the NLG Shock Absorber Assy 32-21-13-400-001 Installation of the NLG Shock Absorber Assy 32-21-13-991-006 Fig. 405 32-21-13-991-007 Fig. 406 32-21-13-991-008 Fig. 407
1EFF : ALL 1 32-21-13Page 437 1 1 May 01/05 1 1 1CES 1
3. Job Set-up
__________
Subtask 32-21-13-941-054
A. Safety Precautions
(1)
In the cockpit, on the panel 400VU put warning notice(s) in position to tell persons not to operate the landing gear control lever.
(2)
On the steering handwheels (CAPT and F/O) and on the brake pedals, put warning notice(s) in position to tell persons not to operate them.
(3) Put the safety barrier in position.
Subtask 32-21-13-860-053
B. Aircraft Maintenance Configuration
(1) Lift the aircraft with jacks until the wheels are off the ground (Ref. TASK 07-11-00-581-001).
Subtask 32-21-13-010-051
C. Get Access
(1)
Remove the NLG shock absorber (Ref. TASK 32-21-13-000-001).
(2)
Use the FALSE JAWS (D46795) and the FALSE JAWS (M46200) to hold the shock absorber.
Subtask 32-21-13-865-054
D. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------121VU HYDRAULIC/BRAKING AND STEERING/SYS2/SPLY 4GG M36 121VU HYDRAULIC/BRAKING AND STEERING/SYS2/CTL 3GG M35 121VU HYDRAULIC/BRAKING AND STEERING/SYS1/CTL 1GG M34 121VU HYDRAULIC/BRAKING AND STEERING/SYS1/IND AND/SPLY 2GG M33
R **ON A/C 051-099,
R 121VU HYDRAULIC/TIRE/PRESS 1GV M31
1EFF : ALL 1 32-21-13Page 438 1 1 May 01/05 1 1 1CES 1
R **ON A/C ALL
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架3(88)
