• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-25 17:53来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 Reason for the Job

__________________
 Self Explanatory


 2.
 Job Set-up Information


______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers No specific warning notice
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-10-00-863-001 Pressurize the Green Hydraulic System 29-10-00-864-001 Depressurize the Green Hydraulic System 29-23-00-863-001 Pressurize the Green Hydraulic System from the Yellow
 Hydraulic System through the PTU with the Electric Pump 29-23-00-864-001 Depressurize the Green and Yellow Hydraulic Systems after Operation of the PTU 32-22-00-991-001 Fig. 201
 1EFF : ALL 1 32-22-00Page 205 1 1 Feb 01/98 1 1 1CES 1


 3. Job Set-up
__________ Subtask 32-22-00-867-051
 A. Aircraft Maintenance Configuration
 (1)
 In the cockpit, on the center pedestal, make sure that :

 -the free-fall control handle is in the Normal position.

 (2)
 Make sure that the control lever of the landing gear is in the DOWN position.


 Subtask 32-22-00-941-051
 B. Safety Precautions
 (1)
 Put the warning notice in position to tell persons not to operate the nose landing gear.

 (2)
 Put the safety barriers in position to prevent access to the travel ranges of the nose gear door.

 (3)
 Make sure that the Ground Door-Opening Handle is locked in the Opening position.


 Subtask 32-22-00-863-050
 C. Pressurize the Green hydraulic system (Ref. TASK 29-23-00-863-001) or (Ref. TASK 29-10-00-863-001)
 4. Procedure
_________ (Ref. Fig. 201/TASK 32-22-00-991-001) Subtask 32-22-00-081-050
 A. Unlock the NLG Doors
 (1) Remove the SAFETY PIN - NLG DOOR (98D32203502000) from the rigging holes of the left and right doors of the nose gear.
 1EFF : ALL 1 32-22-00Page 206 1 1 Feb 01/98 1 1 1CES 1 Subtask 32-22-00-010-052


 B. Close the NLG Doors
 WARNING : FOR SAFETY STAND AFT OF THE GEAR LEG WHEN YOU OPERATE THE

_______ GROUND OPENING CONTROL OF THE DOOR. CAREFULLY READ THE PLACARD ON THE LEG DOOR BEFORE YOU OPEN THE NOSE GEAR DOORS.
 (1)
 Remove the quick release pin from the pusher of the ground door-opening handle.

 (2)
 Push the pusher. Move the ground door-opening handle from the opening position to the closed position.

 (3)
 Release the pusher. Make sure that the ground door-opening handle is locked in the closed position.

 (4)
 Install the quick release pin in the pusher of the ground door-opening handle to prevent its operation.

 (5)
 Make sure that the nose gear doors are closed and uplocked. NOTE : If the doors do not close, put the ground door-opening handle


____ in the opening position. (This is possibly because there is not sufficient pressure in the hydraulic system of the landing gear).
 5. Close-up
________ Subtask 32-22-00-864-050
 A. Depressurize the Green hydraulic system (Ref. TASK 29-10-00-864-001) (Ref. TASK 29-23-00-864-001)
 Subtask 32-22-00-942-051
 B. Removal of Equipments
 (1)
 Remove the safety barriers.

 (2)
 Remove the warning notices.

 (3)
 Make sure that the work area is clean and clear of tools and other items.


 1EFF : ALL 1 32-22-00Page 207 1 1 Feb 01/98 1 1 1CES 1


 NOSE GEAR DOORS - REMOVAL/INSTALLATION
______________________________________ TASK 32-22-00-040-001 Preparation of the A/C for flight without NLG Main Doors Assy WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE LANDING GEAR ARE CLEAR.
_______
 WARNING : MAKE SURE THAT THE CONTROLS AGREE WITH THE POSITION OF THE ITEMS THEY

_______ OPERATE BEFORE YOU PRESSURIZE A HYDRAULIC SYSTEM.
 1.
 Reason for the Job

__________________
 CDL 52-09


 2.
 Job Set-up Information


______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM LANDING GEAR 起落架3(133)