(2)
Remove the drag strut assembly of the nose landing gear (Ref. TASK 32-21-16-000-002).
NOTE : Remove only the connection between the drag strut and the
____
barrel (lower connection).
1EFF : ALL 1 32-21-00Page 622 1 1 Aug 01/05R 1 1 1CES 1
4. Procedure
_________ Subtask 32-21-00-220-050
A. Inspection
(Ref. Fig. 603/TASK 32-21-00-991-005)
(1)
Measure the dimension "D" between the bushes installed on the barrel lugs, at 4 points 90 degrees apart.
(2)
Make an average of these values:
-the permitted deviation between the minimum and maximum value compared with the average value must not be more than 0.2 mm (0.0078 in.).
5. Close-up
________ Subtask 32-21-00-942-061
A. Close-up
(1)
Install the drag strut assembly of the NLG (Ref. TASK 32-21-16-400-002).
(2)
Make sure that the work area is clean and clear of tool(s) and other items.
1EFF : ALL 1 32-21-00Page 623 1 1 Aug 01/05R 1 1 1CES 1
Barrel/Drag Strut Connection
Figure 603/TASK 32-21-00-991-005
1EFF : ALL 1 32-21-00 Page 624
1 1 Aug 01/05
1 1
1CES 1
NOSE GEAR - CLEANING/PAINTING
_____________________________
TASK 32-21-00-100-001
Cleaning/Painting of the Nose Gear
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
GEAR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific safety barriers
No specific warning notice
No specific access platform 2.06 m (6 ft. 9 in.)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-006
CORROSION REMOVAL DESEALING (Ref. 20-31-00)
Material No. 09-001 USA MIL-S-8802 TYPE I CLASS A
FUEL TANK SEALANTPOLYSULFIDE (Ref. 20-31-00)
Material No. 09-002 USA MIL-S-8802 TYPE I CLASS B
FUEL TANK SEALANTPOLYSULFID(NO LONGER AVAILABLE
(Ref. 20-31-00)
Material No. 11-002 USA MIL-PRF-680
DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT)
(Ref. 20-31-00)
R Material No. 11-003 USA ASTM D 740 METHYL-ETHYL-KETONE (Ref. 20-31-00) Material No. 12-005 USA MIL-R-25134 CHLORINATED,NON PHENOLIC STRIPPERS (Ref. 20-31-00)
Material No. 13-001 USA MIL-C-10578 TYPE II
CORROSION REMOVER PHOSPHORIC ACID BASE
(Ref. 20-31-00)
Material No. 13-002 USA MIL-C-5541 MIL-C-81706 CLASS I/A
CHEMICAL CONVERSION COATING YELLOW ALUMINUM
(Ref. 20-31-00)
1EFF : ALL 1 32-21-00Page 701 1 1 Nov 01/04 1 1 1CES 1 1EFF : ALL 1 32-21-00Page 702 1 1 May 01/05 1 1 1CES 1 Subtask 32-21-00-010-050
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R R R R R R R Material No. 15-004 Material No. 16-001 Material No. 16-005 Material No. 16-016 Material No. 16-035 Material No. 16-055 USA MIL-C-16173 GRADE 3 CORROSION PREVENTIVE COMPOUND (Ref. 20-31-00) ANTI-CORROSION PRIMER (POLYURETHANE ) (Ref. 20-31-00) WASH PRIMER (ZINCCHROMATE) OBSOLETE USE16-020 (Ref. 20-31-00) C Z-12.383 EXTERNAL DECORATION PAINT (Ref. 20-31-00) X (Ref. 20-31-00) EPOXIDE PRIMER (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架3(66)
