A320飞机维护手册 AMM LANDING GEAR 起落架3(111)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

R  (b) Remove the screw (77) with a soft drift. 
R  (c) Remove the upper shaft (71) with the EXTRACTOR (J47563). 
R  (d) Remove the washers (72) and (73). 
R  (e) Remove the upper arm from the torque links. 
R  (f) Retain the support assy 
R  1_  Remove and discard the cotter pins (65). Remove the nuts (66),
R  the washers (64), the screws (60) and the washers (61). 
R  2_  Remove the stop (62).
R  3_  Remove and discard the cotter pin (74). Remove the nut (76),
R  the washer (75), the screw (68) and the washer (67). 
R  4_  Remove the support (63).

R 1EFF : 051-051, 1 32-21-27Page 418 1 1 May 01/05 1 1 1CES 1

R  Nose Gear Torque Links - Upper Hinge 
R  Figure 405A/TASK 32-21-27-991-003-A 
R 1EFF :  051-051,  1  32-21-27 Page 419 
1  1  May 01/05
 1  1
 1CES  1

 **ON A/C ALL

 TASK 32-21-27-400-001
 Installation of the Torque Link Assy
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______
 GEAR.

 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific flat spanner
 No specific safety barriers
 No specific warning notice(s)

R No specific  Torque Wrench : range 0.00 to 1.20 m.daN
R (0.00 to 9.00 lbf.ft) No specific Torque Wrench : range 0.20 to 3.60 m.daN
 (2.00 to 26.00 lbf.ft) No specific Torque Wrench : range 1.00 to 10.00 m.daN
 (8.00 to 75.00 lbf.ft)
 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
Material No. 04-004  USA MIL-PRF-23827 TYPE I
 SYNTH.ESTER BASED GREASE HIGH PRESSURE
 (Ref. 20-31-00)

 Material No. 04-022  USA MIL-PRF-81322 GRADE 2
 SYNTHE.HYDROCARBON GREASE HIGH PRESSURE
 (Ref. 20-31-00)

 Material No. 05-047  C Z-11.904
 ANTI COR. COMPOUND(HIGH TEMP.SILICONE SEALANT)
 (Ref. 20-31-00)

R 1EFF : ALL 1 32-21-27Page 420 1 1 May 01/05 1 1 1CES 1

 -------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 09-001  USA MIL-S-8802 TYPE I CLASS A
 FUEL TANK SEALANTPOLYSULFIDE (Ref. 20-31-00)

 Material No. 11-002  USA MIL-PRF-680
 DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT)
 (Ref. 20-31-00)

 Material No. 11-004A
 1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
 (Ref. 20-31-00)

 C. Expendable Parts
 -------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION  |IPC-CSN
 -------------------------------------------------------------------------------
5 washer 32-21-11 08A-095 5 washer 32-21-11 08B-095 9 cotter pin 32-21-11 08A-072 9 cotter pin 32-21-11 08B-072 20 washer 32-21-13 03A-170 20 washer 32-21-13 03B-170 20 washer 32-21-13 03C-170 21 washer 32-21-13 03A-170 21 washer 32-21-13 03B-170 21 washer 32-21-13 03C-170 24 cotter pin 32-21-11 08A-010 24 cotter pin 32-21-11 08B-010 29 cotter pin 32-21-11 08A-010 29 cotter pin 32-21-11 08B-010 65 cotter pin 32-21-11 12 -060 65 cotter pin 32-21-11 12B-060 67 cotter pins 32-21-11 12 -060 67 cotter pins 32-21-11 12B-060 72 washer 32-21-11 08A-050 73 washer 32-21-11 08A-050 74 cotter pin 32-21-11 14A-010 130 cotter pin 32-21-11 13A-010 140 lockwasher 32-21-11 13A-050
R  140 lockwasher 32-21-11 13C-050 140 cotter pin 32-21-11 14A-010 142 lockwasher 32-21-11 13A-050
R  142 lockwasher 32-21-11 13C-050 142 cotter pin 32-21-11 14A-010
 1EFF : ALL 1 32-21-27Page 421 1 1 Aug 01/05 1 1 1CES 1

 D. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE DESIGNATION
 -------------------------------------------------------------------------------
07-11-00-581-003 Lifting of the Aircraft at Forward Jacking Point, MLG Wheels on the Ground 07-11-00-586-001 Lowering of the Aircraft at Forward Jacking Point,
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM LANDING GEAR 起落架3(111)