A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the fan cowl doors: (Ref. TASK 71-13-00-410-040) FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR
(3)
Remove the warning notice(s).
ENGINE STARTING - SERVICING
___________________________
TASK 12-13-80-610-001
Drain and Replenish Oil System
1. Reason for the Job
__________________
Refer to the MPD TASK: 801110-C3
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific container 2l (0.5 USgal)
No specific warning notice R No specific Torque Wrench : range 5.00 to 35.00 lbf.in R (0.05 to 0.40 m.daN)
No specific Torque Wrench : range 36.00 to 220.00 lbf.in
(0.40 to 2.60 m.daN)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. CP2442 * engine oil (Ref. 70-30-00) Material No. CP8001 * lockwire 0.032 in. (0.8 mm) dia. (Ref. 70-30-00) Material No. CP8002 * lockwire 0.032 in. (0.8 mm) dia. (Ref. 70-30-00)
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors
71-13-00-410-040 Closing of the Fan Cowl Doors
80-11-10-000-002 Removal of the Pneumatic Starter
80-11-10-210-001 Check Chip Detector
80-11-10-400-002 Installation of the Pneumatic Starter
R **ON A/C 001-049, 062-099, 101-101, 106-149, 151-199, 204-299, 301-399, R 401-499,
12-13-80-991-300-A Fig. 301
**ON A/C 051-061, 102-105, 201-203,
12-13-80-991-300 Fig. 301A
**ON A/C ALL
3. Job Set-up
__________
Subtask 12-13-80-941-052
A. Safety Precautions
(1)
On the center pedestal, on the ENG panel 115VU:
(a) Put a warning notice to tell persons not to start the engine.
(2)
Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.
(3)
On the overhead maintenance panel 50VU:
(a)
Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.
(b)
Put a warning notice to tell persons not to energize the FADEC 1(2).
Subtask 12-13-80-010-052
B. Open the fan cowl doors: (Ref. TASK 71-13-00-010-040) FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR
4. Procedure_________
R R **ON A/C 001-049, 062-099, 101-101, 106-149, 151-199, 204-299, 301-399, 401-499,
(Ref. Fig. 301/TASK 12-13-80-991-300-A)
**ON A/C 051-061, 102-105, 201-203,
(Ref. Fig. 301A/TASK 12-13-80-991-300)
R R **ON A/C 001-049, 062-099, 101-101, 106-149, 151-199, 204-299, 301-399, 401-499,
Subtask 12-13-80-680-051-A
A. Drain the starter
(1) Remove the filler plug (10). Discard the O-ring (20).
(2) Remove the knurled magnetic plug (50) as follow:
(a) Push and turn counter-clockwise to release the plug (50).
(3) Put a container below the starter. Cut and remove the lockwire. Remove the drain plug (70), and let the oil drain in the container 2l (0.5 USgal) . Discard the O-ring (80).
(4) Measure the quantity of the drained oil:
(a) If the oil quantity is more than 0.5 l (0.1320 USgal), the starter is serviceable.
(b) If the quantity is less than 0.5 l (0.1320 USgal), replace the stater (Ref. TASK 80-11-10-000-002) (Ref. TASK 80-11-10-400-002).
Pneumatic Starter Servicing Figure 301/TASK 12-13-80-991-300-A
R 1EFF : 001-049, 062-099, 101-101, 106-149, 1 12-13-80Page 304 1151-199, 204-299, 301-399, 401-499, 1Aug 01/05 1 1 1CES 1
Pneumatic Starter Servicing
Figure 301A/TASK 12-13-80-991-300
R 1EFF : 051-061, 102-105, 201-203, 1 12-13-80Page 305 1 1 May 01/05 1 1 1CES 1
(5) Carefully examine the oil removed from the starter and the magnetic plug (50) for metal particles (Ref. TASK 80-11-10-210-001). Then, remove and discard the two O-rings (60).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM SERVICING 1(88)
