-
the PITCH data displayed for the LEFT, CTR and RIGHT is no more or less than 0.1 of each other
-
the ROLL data displayed for the LEFT, CTR and RIGHT is no more or less than 0.1 of each other.
NOTE : The FQIS input parameter pages are not automatically updated. The
____ operation of the Fuel System can be monitored through the CFDS (FUEL) input parameter pages. The pages must be continuously updated. Use the NEXT PAGE control on the MCDU to cycle the pages to update the screen.
(1) When the SYSTEM REPORT/TEST Menu page comes into view, do this procedure:
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
Push the line key adjacent to the - the FUEL Main Menu first page comes FUEL indication. into view.
2.
On the MCDU control panel push - the FUEL Main Menu second page comes the NEXT PAGE key. into view.
3.
Push the line key adjacent to the - the MCDU shows the page FQIS INPUT INPUT PARAMETER VALUES PARAMETERS - RECORD THE PITCH AND indication. ROLL DATA.
(2)
In Table 1, use the PITCH data to find the equivalent number.
(3)
In Table 1, use the ROLL data to find the equivalent letter.
(4)
Put together the number and the letter to identify the square to use in the MLI procedure (Ref. TASK 12-11-28-650-007).
TABLE 1
Pitch Ref Roll Ref
minus 1.5 1 minus 1.5 A
minus 1.0 2 minus 1.0 B
minus 0.5 3 minus 0.5 C
0.0 4 0.0 D plus 0.5 5 plus 0.5 E plus 1.0 6 plus 1.0 F plus 1.5 7 plus 1.5 G
**ON A/C 301-399,
Subtask 12-11-28-860-072-A
A. Get Access to the FQIC Input Parameters Page 1
NOTE : This procedure can only be used if:
____
-the PITCH and ROLL data is taken from the ADIRS (make sure that the FQIS Status page does not show "NO DATA FROM ADIRU 1" and "NO DATA FROM ADIRU 2")
R 1EFF : ALL 1 12-11-28Page 363 1 1 May 01/05 1 1 1CES 1
-
the PITCH data displayed for the LEFT, CTR and RIGHT is no more or less than 0.1 of each other
-
the ROLL data displayed for the LEFT, CTR and RIGHT is no more or less than 0.1 of each other.
NOTE : The FQIS input parameter pages are automatically updated every 5.5
____
seconds.
(1) When the SYSTEM REPORT/TEST Menu page comes into view, do this procedure:
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
Push the line key adjacent to the - the FUEL Main Menu first page comes FUEL indication. into view.
2.
On the MCDU control panel push - the FUEL Main Menu second page comes the NEXT PAGE key. into view.
3.
Push the line key adjacent to the - the MCDU shows the page FQIS INPUT INPUT PARAMETER VALUES PARAMETERS - RECORD THE PITCH AND indication. ROLL DATA.
(2)
In Table 1, use the PITCH data to find the equivalent number.
(3)
In Table 1, use the ROLL data to find the equivalent letter.
(4)
Put together the number and the letter to identify the square to use in the MLI procedure (Ref. TASK 12-11-28-650-007).
TABLE 1
Pitch Ref Roll Ref minus 1.5 1 minus 1.5 A minus 1.0 2 minus 1.0 B minus 0.5 3 minus 0.5 C
0.0 4 0.0 D plus 0.5 5 plus 0.5 E plus 1.0 6 plus 1.0 F plus 1.5 7 plus 1.5 G
R 1EFF : 301-399, 1 12-11-28Page 364 1 1 May 01/05 1 1 1CES 1 **ON A/C ALL
5. Close-up
________ Subtask 12-11-28-860-073
A. Aircraft Maintenance Configuration
(1) Put the aircraft back to its initial configuration.
(a)
On the MCDU, push the line key adjacent to the RETURN indication until the MCDU Menu page comes into view.
(b)
On the MCDU, set the BRT knob to OFF.
(c)
Do the ADIRS stop procedure (Ref. TASK 34-10-00-860-005).
(d)
Do the EIS stop procedure (Ref. TASK 31-60-00-860-002).
(e)
De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
R 1EFF : ALL 1 12-11-28Page 365 1 1 May 01/05 1 1 1CES 1
TASK 12-11-28-650-007
Use of Magnetic Level Indicators (MLI)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM SERVICING 1(36)
