曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Connect
9a - Take the cover screw out
of its housing. Maintain the
screwdriver up while the screw is
moved to the surgical site. Seal
the implant with the cover screw
Note : If the implant insertion is not com- 10a - Suture the gingiva
plete with the contra-angle, finalize the
insertion with the ratchet wrench and its
screwtool.
If the implant requires more than 50Ncm to insert
into the bone, carefully remove the implant and tap
the bone using the screw tap. Then re-insert the
implant using the above protocol.
10b - Take the cover screw out of
its housing. Maintain the screwdriver
up while the screw is moved to
the surgical site. Seal the implant
with the cover screw
9b - Remove the ratchet wrench and 11b - Suture the gingiva
vertically remove the screwtool
Note: If the implant requires more than
50Ncm to insert into the bone, carefully
remove the implant and tap the bone using the
screw tap. Then re-insert the implant using the
above protocol
4 - Use the drill :
#3 for Ø 3.5 implants
#3 then 4 for Ø 4 implants
#3, 4 then 5 for Ø 5 implants
5 -
Use screw tap Ø3,5 for Ø3,5 implants
Use screw tap Ø4 for Ø4 implants
Use screw tap Ø5 for Ø5 implants
3 - Use drill #2 up to the
required mark
34
CONNECT SYSTEM
Gold cast-to screw-retained abutment + screw with plastic sleeve
8 possible positions– Anti-unscrewing system
8 possible positions– Anti-unscrewing system
Anti-unscrewing system
COMMENTS : Anti-unscrewing system : the system is activated with a 30 Newtons . cm torque
(use the torque wrench, or torque screw-tool see p.13).
Titanium abutment + screw - shoulder height 2 or 4 mm
Plastic castable screw-retained abutment + screw
Titanium abutment - non shouldered abutment + screw
Shoulder height in mm
For implants Ø 3,5 mm
For implants Ø 4 mm
For implants Ø 5 mm
0°
2 4
O-MT320 O-MT340
O-MT420 O-MT440
O-MT520 O-MT540
15°
2 4
O-MT321 O-MT341
O-MT421 O-MT441
O-MT521 O-MT541
25°
2 4
O-MT322 O-MT342
O-MT422 O-MT442
O-MT522 O-MT542
25°
O-MT302
O-MT402
O-MT502
15°
O-MT301
O-MT401
O-MT501
0°
O-MT300
O-MT400
O-MT500
For implants Ø 3,5 mm
For implants Ø 4 mm
For implants Ø 5 mm
For implants Ø 3,5 mm
For implants Ø 4 mm
For implants Ø 5 mm
O-MC300
O-MC400
O-MC500
For implants Ø 3,5 mm
For implants Ø 4 mm
For implants Ø 5 mm
O-MS300
O-MS400
O-MS500
PROSTHETIC COMPONENTS
Anti-unscrewing system
Zirconnect
35
25°
CO-MZ322
CO-MZ422
CO-MZ522
15°
CO-MZ321
CO-MZ421
CO-MZ521
0°
CO-MZ320
CO-MZ420
CO-MZ520
For implants Ø 3,5 mm
For implants Ø 4 mm
For implants Ø 5 mm
25°
CO-MZ332
CO-MZ432
CO-MZ532
15°
CO-MZ331
CO-MZ431
CO-MZ531
0°
CO-MZ330
CO-MZ430
CO-MZ530
For implants Ø 3,5 mm
For implants Ø 4 mm
For implants Ø 5 mm
MCB abutment : aesthetic line
MCB : Zirconia titanium ring - Shoulder height : 3,5 mm + screw
MCB : Zirconia titanium ring - Shoulder height : 2,5 mm + screw
Shoulder height 2,5 mm Shoulder height 3,5 mm
For implants Ø 3,5 mm
For implants Ø 4 mm
For implants Ø 5 mm
CO-MZC320
CO-MZC420
CO-MZC520
CO-MZC330
CO-MZC430
CO-MZC530
Shoulder height 2,5 mm Shoulder height 3,5 mm
For implants Ø 3,5 mm
For implants Ø 4 mm
For implants Ø 5 mm
CO-MZS320
CO-MZS420
CO-MZS520
CO-MZS330
CO-MZS430
CO-MZS530
8 possible positions – Anti-unscrew
8 possible positions – Anti-unscrew
MCB : Castable ring + screw
Anti-unscrewing system
MCB : Castable ring with overflow ring + screw
Anti-unscrewing system
PROSTHETIC COMPONENTS
Connect
36
Castable bar
copping + conical head abutment + screw
copping + conical head abutment + screw
Gold cast-to screw-retained
Conical head protection cap
Plastic castable screw-retained
Clip
Castable bar BC019
Titanium base height 2 mm
O-PS320
O-PS420
O-PS520
Titanium base height 4 mm
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
航空资料40(76)
