曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Care should be taken during lavatory
installation not to disturb the
washer placement.
Galley Hard Mounts
Galley hard mounts seal the mount to non-textile fl ooring (NTF)
junction. The mount uses a sealant kit containing three washers
and a mount seal. The washers go on the top and bottom of
the bushing and under the fastener head. The mount seal goes
between the galley stud and the NTF.
The current sealing option uses an o-ring that quickly hardens
and creates a leak path for liquids. This leak path exposes dissimilar
metals and the carbon fl oorboard to liquids creating a
battery and corrosion.
Airbus A320 Aircraft Family Installation Guide
Skyfl ex®
aircraft sealant
GORE, SKYFLEX, and designs are trademarks of W. L. Gore & Associates, Inc. ©2007 W. L. Gore & Associates, Inc.
Worldwide Sales and Support
Contact Information
China: Beijing
+86 10 6510 2980
China: Shanghai
+86 21 6247 1999
China: Shenzhen
+86 755 8359 8262
Germany
+49 9144 6010
International
+1 302 292 5100
Japan
+81 3 3570 8712
Korea
+82 2 393 3411
North America
1 800 445 4673
Singapore
+65 6 733 2882
Taiwan
+886 2 8771 7799
United Kingdom
+44 1382 561511
W. L. Gore & Associates, Inc.
402 Vieve’s Way Elkton, MD 21921
1 (800) 445-GORE (4673)
www.gore.com
Skyflex®
aircraft sealant product guide
Skyflex®
aircraft sealant
table of contents
Summary ............................................................................. 3
Benefits ............................................................................. 3
Time Analysis.......................................................................... 4
Military Technical Order Approvals .......................................... 5
Commercial Approvals ............................................................ 6
Commonly Used Part Numbers ................................................ 8
GORE™ SKYFLEX® Sealant Tape ........................................... 11
Installation Techniques ............................................... 11
Typical Applications .................................................... 12
Data Sheet .................................................................. 13
GORE™ SKYFLEX® Environmental Gaskets ............................. 14
Typical Applications .................................................... 14
Data Sheet .................................................................. 15
GORE™ SKYFLEX® Fuel Sealant ............................................. 16
Typical Applications .................................................... 16
Data Sheet .................................................................. 17
2
summary
GORE™ SKYFLEX® Aircraft Sealant offers the lightest weight, non-curing,
non-hazardous form-in-place sealant technique. This product
can be installed and maintained more efficiently than all other
sealant methods. This revolutionary material provides excellent
protection against corrosion, water ingress, and other environmental
influences including fuels and oils.
GORE™ SKYFLEX® Sealant remains flexible and compliant over many
panel installation cycles, retaining all of the designed benefits and
features that are crucial to ensure the integrity of every application
today.
GORE™ SKYFLEX® Sealant is available in many forms, including
ribbed sealant tape, flat sealant tape, sheet, die cut gaskets, and
environmental and fuel resistant forms. For more information or
assistance in choosing the sealant right for your application contact
Gore.
benefits
• Non Hazardous/No hazardous waste disposal
• Resistant to corrosion
• Multiple panel removal/installation cycles possible
• Lightweight
• Protection against water ingress and other environmental influences
• No sealant cure time
• Easy to install
• Conforms to surface irregularities
• Temperature range: -240°C to +260°C
3
Skyflex®
aircraft sealant
time analysis
How much time are you spending sealing your panels?
A typical panel installation using traditional sealants takes up to 120
minutes each removal cycle, plus an additional cure time of 6 to 48
hours. The typical time estimate is derived using the following:
• Scraping off and cleaning old sealant=45 minutes
• Masking panel off=15 minutes
• Mixing polysulfide sealant=15 minutes
• Cleanup=15 minutes
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
航空资料16(89)
