The Appendix IV to this CAR defines all classes and ratings possible under M.A. Subpart F.
(b)
An approved maintenance organisation may fabricate, in conformity with maintenance data, a restricted range of parts for the use in the course of undergoing work within its own facilities, as identified in the maintenance organisation manual.
M.A.604 Maintenance organisation manual
a) The maintenance organisation shall provide a manual containing at least the following information:
1.
a statement signed by the accountable manager to confirm that the organisation will continuously work in accordance with CAR M and the manual at all times, and;
2.
the organisation's scope of work, and;
3.
the title(s) and name(s) of person(s) referred to in M.A.606(b), and;
4.
an organization chart showing associated chains of responsibility between the person(s) referred to in M.A.606(b), and;
5.
a list of certifying staff with their scope of approval, and;
6.
a list of locations where maintenance is carried out, together with a general descriptions of the facilities;
7.
procedures specifying how the maintenance organisation ensures compliance with this CAR, and;
8.
the maintenance organisation manual amendment procedure(s).
b) The maintenance organisation manual and its amendments shall be approved by the DGCA Regional Office.
c) Notwithstanding paragraph (b) minor amendments to the manual may be approved
Rev 0, dated 2nd March, 2010 through a procedure (hereinafter called indirect approval) provided the amendments are submitted to DGCA local office at least 15 days before their effectivity and the procedure is documented.
M.A.605 Facilities
The organisation shall ensure that:
a) Facilities are provided for all planned work, specialised workshops and bays are segregated as appropriate, to ensure protection from contamination and the environment.
b) Office accommodation is provided for the management of all planned work including in particular, the completion of maintenance records.
c) Secure storage facilities are provided for components, equipment, tools and material. Storage conditions shall ensure segregation of unserviceable components and material from all other components, material, equipment and tools. Storage conditions shall be in accordance with the manufacturers' instructions and access shall be restricted to authorised personnel.
M.A.606 Personnel requirements
a) The organisation shall appoint an accountable manager, who has corporate authority for ensuring that all maintenance required by the customer can be financed and carried out to the standard required by this CAR.
b) A person or group of persons shall be nominated with the responsibility of ensuring that the organisation is always in compliance with this Subpart. Such person(s) shall be ultimately responsible to the accountable manager.
c) All paragraph (b) persons shall be able to show relevant knowledge, background and appropriate experience related to aircraft and/or component maintenance.
d) The organisation shall have appropriate staff for the normal expected contracted work. The use of temporarily sub-contracted staff is permitted in the case of higher than normally expected contracted work and only for personnel not issuing a certificate of release to service.
e) The qualification of all personnel involved in maintenance shall be demonstrated and recorded.
f) Personnel who carry out specialised tasks such as welding, non-destructive testing/inspection other than colour contrast shall hold relevant certificate of competency.
g) The maintenance organisation shall have sufficient certifying staff to issue M.A.612 and M.A.613 certificates of release to service for aircraft and components. They shall comply with the requirements of DGCA Aircraft Maintenance Engineers Licencing requirements.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：CONTINUING AIRWORTHINESS REQUIREMENTS CAR -M(14)
