2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 22-83-34-000-001 Removal of the FMGC (1CA1,1CA2)
AMM 22-83-34-400-001 Installation of the FMGC (1CA1,1CA2)
AMM 22-96-00-710-001 Operational Test of the AFS
R AMM 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
R from the External Power AMM 31-60-00-860-001 EIS Start Procedure AMM 31-63-34-000-001 Removal of the DMC (1WT1,1WT2,1WT3) AMM 31-63-34-400-001 Installation of the DMC (1WT1,1WT2,1WT3) ASM 22-85/02
3. Fault Confirmation
__________________
A. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/FCU/1 9CA1 B05 49VU AUTO FLT/FMGC/1 10CA1 B02 121VU AUTO FLT/FCU/2 9CA2 M21 121VU AUTO FLT/FMGC/2 10CA2 M17
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞22-83-00∞∞∞∞∞∞∞∞∞∞Page 241
Aug 01/05 CES B. Aircraft Maintenance Configuration
(1) Do the EIS start procedure (Ref. AMM TASK 31-60-00-860-001).
(2) Make sure that the two FDs are engaged (if they are not engaged, push the FD pushbutton switches on the FCU).
C. Test
(1) Open the circuit breaker 10CA1 and make sure that the FD 2 indication comes into view on the PFD 1.
(2) Close the circuit breaker 10CA1.
(3) Do the operational test of the AFS (Ref. AMM TASK 22-96-00-710-001) and read the result for the FMGC 1.
4. Fault Isolation
_______________
A. If the FD 2 indication does not come into view on the PFD 1 and if the test gives the maintenance message AFS: FMGC1/FMGC2 (FD CKT):
- replace the FMGC-2 (1CA2), (Ref. AMM TASK 22-83-34-000-001) and (Ref. AMM TASK 22-83-34-400-001).
(1) If the fault continues:
- do a check and repair the wiring of the FD OWN ENGD MON OPP discrete (from the FMGC 2 (1CA2) to the first terminal block), (Ref. ASM 22-85/02).
B. If the FD 2 indication does not come into view on the PFD 1 and if no messages come into view after the test:
- replace the DMC-1 (1WT1), (Ref. AMM TASK 31-63-34-000-001) and (Ref. AMM TASK 31-63-34-400-001).
(1) If the fault continues:
- do a check and repair the wiring of the FD 2 ENGD from the DMC 1 (1WT1) to the first terminal block, (Ref. ASM 22-85/02).
C. If the FD 2 indication comes into view on the PFD 1 and if the test gives the maintenance message AFS: FMGC1/FMGC2 (FD CKT):
- replace the FMGC-1 (1CA1), (Ref. AMM TASK 22-83-34-000-001) and (Ref. AMM TASK 22-83-34-400-001).
(1) If the fault continues:
- do a check of the wiring of the FD OPP ENGD MON discrete (from the FMGC 1 (1CA1) to the first terminal block), (Ref. ASM 22-85/02).
(a) If there is no continuity:
- repair the above wiring.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞22-83-00∞∞∞∞∞∞∞∞∞∞Page 242
Aug 01/05R CES
(b) If there is continuity: - do a check and repair the wiring of the FD OPP ENGD COM discrete (from the FMGC 1 (1CA1) to the FMGC 2 (1CA2)), (Ref. ASM 22-85/02).
D. Do the test given in Para. 3.
R 5. Close-up________
R A. Put the aircraft back to its initial configuration.
R (1) Close the circuit breaker 10CA1.
R R (2) De-energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-862-002).
Automatic Transfer of the FD 1 Indication to the PFD 2 Inoperative
1. Possible Causes
_______________
- FMGC-1 (1CA1)
- DMC-2 (1WT2)
- FMGC-2 (1CA2)
- wiring of the FD OWN ENGD MON OPP discrete (from the FMGC 1 (1CA1) to the first terminal block)
- wiring of the FD 1 ENGD from the DMC 2 (1WT2) to the first terminal block
- wiring of the FD OPP ENGD MON discrete (from the FMGC 2 (1CA2) to the first terminal block)
- wiring of the FD OPP ENGD COM discrete (from the FMGC 2 (1CA2) to the FMGC 1 (1CA1))
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 AUTO FLIGHT 自动飞行2(74)
