Linkage of the Vent Door
Figure 404B/TASK 52-32-21-991-003-B
R 1EFF : 106-149, 221-299, 301-399, 1 52-32-21Page 429 1 1 Aug 01/05 1 1 1CES 1
Linkage of the Vent Door Mechanism
Figure 404C/TASK 52-32-21-991-003-A
R 1EFF : 151-199, 1 52-32-21 Page 430
1 1 Aug 01/05
1 1
1CES 1
(3)
Disconnect the connection rod (82) from the vent door lever (85) of the safety shaft as follows:
(a)
Remove and discard the cotter pin (87) from the nut (86).
(b)
Remove the nut (86), the washers (84) and the bolt (83) from the vent door lever (85).
(c)
Remove the lower eye end of the connection rod (82) from the fork end of the vent door lever (85).
(4)
Disconnect the connection rod (82) from the lever (80) as follows:
(a)
Remove and discard the cotter pin (77) from the nut (78).
(b)
Remove the nut (78), the washers (79) and the bolt (81) from the lever (80).
(c)
Remove the upper eye end of the connection rod (82) from the fork end of the lever (80).
(5)
Disconnect the link assy (88) from the target lever (90) as follows:
(a)
Remove and discard the cotter pin (91) from the nut (92).
(b)
Remove the nut (92), the washer (93), the sleeve (94) and the bolt (89) from the link assy (88).
(c)
Remove the fork end of the link assy (88) from the target lever (90).
(6)
Disconnect the link assy (88) from the drive shaft lever (102) as follows:
(a)
Remove and discard the cotter pin (96) from the nut (97).
(b)
Remove the nut (97) and the washer (98) from the drive shaft lever (102).
(c)
Remove the eye end of the link assy (88) from the drive shaft lever (102).
R 1EFF : 001-049, 053-099, 101-105, 151-199, 1 52-32-21Page 431 1201-220, 1Aug 01/05 1 1 1CES 1 Subtask 52-32-21-020-053
B. Removal of the Gearbox **ON A/C 001-049, 053-099, 101-105, 201-220,
(Ref. Fig. 405/TASK 52-32-21-991-004) **ON A/C 151-199,
(Ref. Fig. 405C/TASK 52-32-21-991-004-A) **ON A/C 001-049, 053-099, 101-105, 151-199, 201-220,
(1)
Disassemble the drive shaft lever (102) from the drive shaft of the gear box (123) as follows:
(a)
Remove the nuts (128), the washers (127), the sleeves (126) and the tapered pins (125) from the lever (124).
(b)
Remove the nuts (133), the washers (132), the sleeves (126) and the tapered pins (129) from the safety cam (130).
(c)
Hold the safety cam (130) so that it does not fall down during the removal of the drive shaft lever (102).
(d)
Pull the drive shaft lever (102) from the cargo door frame and remove the safety cam (130).
(2)
Remove the shaft lever (76) from the output shaft of the gear box
(123) as follows:
(a)
Remove the nuts (120), the sleeves (121) and the tapered pins
(111) from the shaft lever (76).
(b)
Remove the protection plug (110) from the shaft lever (76).
(c)
Move the shaft lever (76) from the output of the gear box (123).
(3)
Remove the gear box (123) together with the lever (124) from the cargo door structure as follows:
(a) Support the gear box (123) and remove the screws (119) and the washers (118) from the longeron (116).
R 1EFF : 001-049, 053-099, 101-105, 151-199, 1 52-32-21Page 432 1201-220, 1Aug 01/05 1 1 1CES 1
R Linkage of the Vent Door
R Figure 404D/TASK 52-32-21-991-003-D
R 1EFF : 401-499, 1 52-32-21 Page 433
1 1 Aug 01/05
1 1
1CES 1
Gear Box of the Vent Door Mechanism
Figure 405/TASK 52-32-21-991-004
R 1EFF : 001-049, 053-099, 101-105, 201-220, 1 52-32-21Page 434 1 1 Aug 01/05 1 1 1CES 1
Gear Box of the Vent Door Mechanism
Figure 405A/TASK 52-32-21-991-004-C
R 1EFF : 051-052, 1 52-32-21 Page 435
1 1 Aug 01/05
1 1
1CES 1
Cover Assembly of the Vent Door Mechanism Figure 405B/TASK 52-32-21-991-004-B
R 1EFF : 106-149, 221-299, 301-399, 1 52-32-21Page 436 1 1 Aug 01/05 1 1 1CES 1
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门5(81)
