Material No. 05-027 USA MIL-L-81309 R RUST INHIBITOR(FOR CORROSION USE 15-004) R (Ref. 20-31-00)
Material No. 10-002
X (Ref. 20-31-00)
Material No. 11-002 USA MIL-PRF-680
DRY CLEANING SOLVENT (VARSOL/WHITE SPIRIT)
(Ref. 20-31-00)
Material No. 11-004 USA MIL-T-81533
1.1.1TRICHLOROETHANE (METHYL CHLOROFORM)
(Ref. 20-31-00)
1EFF : ALL 1 52-32-11Page 701 1 1 May 01/02 1 1 1CES 1 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 11-019 USA AMS 1535
CABIN WINDOW CLEANER (Ref. 20-31-00)
Material No. 13-002 USA MIL-C-5541 MIL-C-81706 CLASS I/A
CHEMICAL CONVERSION COATING YELLOW ALUMINUM
(Ref. 20-31-00)
Material No. 16-002 GB BAEP 3536 POLYURETHANE TOPCOAT GREY (FOR INTERNAL APPLIC.) (Ref. 20-31-00)
Material No. 16-006
ANTI-CORROSION PRIMER (EPOXY-IMPRVD ADHESION)
(Ref. 20-31-00)
Material No. 19-003 USA AMS 3819
LINT-FREE COTTON CLOTH (Ref. 20-31-00)
Material No. 19-004
WHITE TALCUM POWDER (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the
Yellow Electric Pump
52-32-13-000-001 Removal of the Lining and Insulation
52-32-13-400-001 Installation of the Lining and Insulation
3. Job Set-up
__________
R **ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
Subtask 52-32-11-010-064
A. Get Access
(1)
Open the AFT cargo compartment door (referred to as cargo door) (Ref. TASK 52-30-00-860-001).
(2)
Remove the door lining and the insulation mats from the cargo door (Ref. TASK 52-32-13-000-001) to clean the internal structure.
1EFF : ALL 1 52-32-11Page 702 1 1 May 01/05 1 1 1CES 1
(3)
Put the access platform in position at the cargo door.
(4)
Remove the access panel 826AR to clean the door locking mechanism(s) and the adjacent structure.
R **ON A/C 151-199, 401-499,
Subtask 52-32-11-010-064-A
A. Get Access
(1)
Open the AFT cargo compartment door (referred to as cargo door) (Ref. TASK 52-30-00-860-001).
(2)
Remove the door lining and the insulation mats from the cargo door (Ref. TASK 52-32-13-000-001) to clean the internal structure.
(3)
Put the access platform in position at the cargo door.
(4)
Remove the access panels 826AR, 826BR to clean the door locking mechanism(s) and the adjacent structure.
**ON A/C ALL
4. Procedure
_________
Subtask 52-32-11-160-050
A. Cleaning of the Structure of the Cargo Door and the Related Vent Door
(1)
Remove all loose particles and unwanted material with a vacuum cleaner and a dry brush.
(2)
Clean the painted components of the structure of the cargo door and the vent door as follows:
(a)
Use a lint-free cloth or a brush and carefully clean the internal structure with CLEANING AGENTS (Material No. 11-004).
(b)
Carefully clean the adjacent structure of the door locking mechanism with a lint-free cloth and CLEANING AGENTS (Material No. 11-004).
1EFF : ALL 1 52-32-11Page 703 1 1 Aug 01/05 1 1 1CES 1
(c) Carefully clean the outer skin of the cargo door with a lint-free cloth and CLEANING AGENTS (Material No. 11-004).
NOTE : Make sure that the cleaning agent does not dry on the
____
surface.
(3)
Dry the cleaned structure with a dry and clean lint-free cloth or with dry, compressed air.
(4)
Make sure that the corners and the recesses are clean of all unwanted and loose material.
(5)
Examine the drain valves and drain holes to make sure that they are clean and not blocked.
(6)
Remove remaining dirt and all old sealants with a wood or plastic scraper.
(7)
Apply SPECIAL MATERIALS (Material No. 05-027) to the internal structure of the cargo door.
(8)
Apply SPECIAL MATERIALS (Material No. 05-005) to the vertical and horizontal edge members of the cargo door.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门5(64)
