R 1EFF : 051-052, 1 52-32-00Page 403 1 1 May 01/05 1 1 1CES 1
R TASK 52-32-00-440-002
R Reactivation of the Locking Handle
R 1. Reason for the Job__________________
R Refer to the CDL TASK: 52-8
R Cargo door opening system
R Handle of cargo door
R 2. Job Set-up Information______________________
R A. Referenced Information
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 52-32-21-000-001 Removal of the Locking Handle Mechanism
R 52-32-21-400-001 Installation of the Locking Handle Mechanism
R ASRM 52-32-00-201 (for corrective action)
R 3. Job Set-up__________
R Subtask 52-32-00-860-058
R A. Aircraft Maintenance Configuration
R (1) Make sure that the access cover 826AR is removed from the AFT cargo
R compartment door (referred to as cargo door).
R (2) Make sure that the parts retained from the removed component are
R clean and in the correct condition.
R 4. Procedure_________
R Subtask 52-32-00-020-052
R A. Removal of the Locking Handle
R (1) Remove the high-speed tape from cargo door skin around the handle
R recess.
R (2) Remove the damaged locking handle (Ref. TASK 52-32-21-000-001).
R 1EFF : 051-052, 1 52-32-00Page 404 1 1 May 01/05 1 1 1CES 1
R Subtask 52-32-00-420-052
R B. Install the new or repaired locking handle (Ref. TASK 52-32-21-400-001).
R NOTE : The repair of the locking handle is described in the SRM (Ref.
____ R ASRM 52-32-00-201).
R 1EFF : 051-052, 1 52-32-00Page 405 1 1 May 01/05 1 1 1CES 1R **ON A/C ALL
TASK 52-32-00-040-003
Deactivation of the Locking Hooks and Spools
1. Reason for the Job
__________________
Refer to the MMEL TASK: 52-30-02
Doors - Cargo
Cargo door locking hooks and spools
(FAA Only)
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific access platform 3.5 m (11 ft. 6 in.)
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-30-00-860-002 Close the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump 52-32-00-991-007 Fig. 401
1EFF : ALL 1 52-32-00Page 406 1 1 May 01/05 1 1 1CES 1
3. Job Set-up
__________
**ON A/C 001-049, 051-099, 101-149, 201-299, 301-399,
Subtask 52-32-00-010-055
A. Get Access
(1)
Open the AFT cargo compartment door (referred to as cargo door) and safety it with the actuator safety locks (Ref. TASK 52-30-00-860-001).
(2)
Put the access platform in position below the opened cargo door.
(3) Remove the access panel 826AR from the cargo door. R **ON A/C 151-199, 401-499,
Subtask 52-32-00-010-055-A
A. Get Access
(1)
Open the AFT cargo compartment door (referred to as cargo door) and safety it with the actuator safety locks (Ref. TASK 52-30-00-860-001).
(2)
Put the access platform in position below the opened cargo door.
(3) Remove the access panels 826AR, 826BR and 826CR from the cargo door. **ON A/C ALL
Subtask 52-32-00-860-059
B. Aircraft Maintenance Configuration
(1) Deactivate the interlock mechanism of the opened cargo door as follows:
NOTE : This procedure is only necessary, if one of the locking hooks
____
is damaged or inoperative.
(a) Press the roller lever of the interlock mechanism outboard to release the blockage of the locking shaft. 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址:A320飞机维护手册 AMM DOORS 舱门5(2)