(3)
Measure the skin offset "A" between the external contour of the vent door and the AFT cargo door.
NOTE : Make sure that the skin offset "A" which must be out of wind
____ is between 0.5 mm (0.0196 in.) and 1.5 mm (0.0590 in.)
(4)
If the skin offset "A" is not correct, adjust the length of the connection rod (181) as follows:
(a)
Cut and remove the lockwire from the lock devices (182).
(b)
Loosen the jam nuts (183) to release the rod.
(c)
Turn the rod until the skin offset correctly adjusted.
(d)
Tighten the jam nuts (183) and safety them with MISCELLANEOUS (Material No. 19-010) on the lock devices (182).
(5)
Adjust the clearance between the vent door stop (185) and the stop
(189) of the vent door frame as follows:
(a) Pull the door handle out of the recess until it is in the 65 degree position to open the vent door.
1EFF : 151-199, 401-499, 1 52-32-11Page 581 1 1 Aug 01/05 1 1 1CES 1
(b) Install the adjustment bolts (185) with the jam nuts (186) and new tab washers (187) in the hinge arms (188).
NOTE : Make sure that the tab washers (187) are correctly
____ attached on the hinge arms (188).
(c)
Close the vent door again (Refer to Para. A.2).
(d)
Turn the adjustment bolts (185) until the clearance is between
0.2 mm (0.0078 in.) and 0.6 mm (0.0236 in.).
(e)
Tighten the jam nuts (186) and Safety them with the tab washers (187).
(6) Push up the door handle until it is in the UNLOCKED position. position.
**ON A/C ALL
5. Close-up
________ Subtask 52-32-11-410-061
A. Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Put the cover assy to the brackets of the cargo door structure and attach it with the related screws and washers (Ref. TASK 52-32-22-400-001).
(3)
Install the lining and insulation (Ref. TASK 52-32-13-400-001).
(4) Install the access panel 826AR on the cargo door. Subtask 52-32-11-865-068
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1MJ, 3801GX, 3802GX, 3803GX
1EFF : ALL 1 52-32-11Page 582 1 1 Aug 01/05 1 1 1CES 1 Subtask 52-32-11-410-062
C. Close Access
(1)
Remove the actuator safety locks and close the cargo door (Ref. TASK 52-30-00-860-002).
(2)
Remove the access platform(s).
1EFF : ALL 1 52-32-11Page 583 1 1 Aug 01/05 1 1 1CES 1 TASK 52-32-11-820-004
Adjustment of the Door Opening Angle
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific clinometer
No specific access platform 3.5 m (11 ft. 6 in.)
No specific Torque Wrench : range 0.20 to 3.60 m.daN
(2.00 to 26.00 lbf.ft) No specific Torque Wrench : range 2.00 to 20.00 m.daN
(15.00 to 150.00 lbf.ft) 98D52307524000 1 SUPPORT STRUT - CARGO DOORS
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 19-010 USA AMS 5687
LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
(Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
81 cotter pins 52-36-04 08C-080 81 cotter pins 52-36-04 08D-080
1EFF : ALL 1 52-32-11Page 584 1 1 Aug 01/05 1 1 1CES 1
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
20-28-00-912-004 Electrical Bonding of Components With Conductive Bolts and Screws and Bonding Straps in the Fuselage and in the Wings (this does not include the tanks)-
52-30-00-860-001 Open the FWD or AFT Cargo-Compartment Door with the Yellow Electric Pump
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM DOORS 舱门5(42)
